Operation of PEM fuel cells (PEMFC) with the dead-ended anode (DEA) leads to severe voltage transients due to accumulation of nitrogen, water vapor and liquid water in the anode channels and the gas diffusion layer (GDL). Accumulation of nitrogen causes a large voltage transient with a characteristic profile whereas the amount of water vapor in the anode is limited by the saturation pressure, a...

A new vacuum arc type ion source (VARIS) has been developed and tested for high current uranium operation. Figure 1 shows a cross sectional view of the ion source. The discharge arrangement has a tubular anode opposite to the cathode mount carrying 17 cathodes (each one is 5.7mm in diameter and 17mm in length). The anode, made of stainless steel, is placed 15mm apart from the cathode. Its apert...

This study aims to construct an MFC with a photosynthetic algae cathode, which is maintained by self-capturing CO2 released from the anode and utilizing solar energy as energy input. With this system, a maximum power density of 187 mW/m(2) is generated when the anode off gas is piped into the catholyte under light illumination, which is higher than that of 21 mW/m(2) in the dark, demonstrating ...

Transition metal dichalcogenides (TMD), analogue of graphene, could form various dimensionalities. Similar to carbon, one-dimensional (1D) nanotube of TMD materials has wide application in hydrogen storage, Li-ion batteries, and supercapacitors due to their unique structure and properties. Here we demonstrate the feasibility of tungsten disulfide nanotubes (WS2-NTs)/graphene (GS) sandwich-type ...

The performance of an alkaline fuel cell is investigated using three different fuels, e g., methanol, ethanol and sodium borohydride. Pt/C/Ni was used as anode whereas Mn/C/Ni was used as standard (Electro-Chem-Technic, UK) cathode for all the fuels. Thus, the alkaline fuel cell is used for multi-fuel system. Fresh mixture of electrolyte, potassium hydroxide (5M), and fuel (2M) was fed to and w...

The possibility of substituting Pt/C with the hydrogen storage alloy MlNi3.6Co0.85Al0.3Mn0.3 as the anode active material of a proton exchange membrane fuel cell system has been analyzed. The electrochemical properties indicate that a much more electrochemically active anode is obtained by impregnating the active material loaded anode in a Nafion proton conducting polymer. Such performance impr...

Reduction in size and weight of micro-electronic devices becomes limited by the availability of suitable power sources. This paper presents micro-fabrication routes of an aluminum anode/oxygenated alkaline electrolyte/platinum cathode micro cell as a first step towards the development of highly efficient thin form factor aluminum anode cells. On-demand microfluidic addition of electrolyte can o...

A three-dimensional porous architecture makes an attractive electrode structure, as it has an intrinsic structural integrity and an ability to buffer stress in lithium-ion batteries caused by the large volume changes in high-capacity anode materials during cycling. Here we report the first demonstration of a SnO2-coated macroporous Cu foam anode by employing a facile and scalable combination of...

Fabrication of microporous structures for the anode of a thin film solid oxide fuel cell (SOFC(s)) using controlled etching process has led us to increased power density and increased cell robustness. Micropores were etched in the nickel anode by both wet and electrochemical etching processes. The samples etched electrochemically showed incomplete etching of the nickel leaving linked nickel isl...

The gate-controlled diode (or gated diode) is a semiconductor device that combines the function of a p-n junction and a MOS capacitor [1, 2]. The schematic cross-section structure is shown in figure 1. The terminals of the junction are noted A (anode) and K (cathode), while the control electrode is the gate G. The voltage across the p-n junction working in avalanche breakdown regime has the abs...