Zirconia ultrafiltration membranes are widely developed and used for past several years. But the conventional sol-gel methods of zirconia membrane preparation involve many steps. In the present study an attempt was made to develop defect free zirconia ultrafiltration (UF) membrane in single step coating of zirconia nanopowder suspension by slip casting method over multichannel ceramic support. ...

This study examined the effects of 3 mol % yttria-stabilized tetragonal zirconia polycrystal (3Y-TZP) ceramic surface treatments on the tensile bond strength and surface characteristics of enamel. To measure the tensile bond strength, the 3Y-TZP and tooth specimens were manufactured in a mini-dumbbell shape and divided into four groups based on the type of 3Y-TZP surface treatment: polishing (P...

INTRODUCTION All-ceramic crowns with different core materials of different strength and aesthetics are available in recent years. The aesthetics of the crown depends mainly on the shade and translucency. Clinician should be aware of the quality and characteristics of these materials so that they will be able to opt for good material for successful clinical use. AIM AND OBJECTIVE The aim of th...

In this study, isophthalic acid-zirconium(IV) nanocomposite has been prepared from zirconyl nitrate pentahydrate and potassium iodide, with isophthalic acid, (C8H6O4=Benzene-1,3-dicarboxylic acid) as a ligand, via sonochemical method in ethylene glycol and methanol as solvents. The crystalline tetragonal ZrO2 has been produced by thermal decomposition of isophthalic acid-zirconium(IV) nanocompo...

MFI type zeolite membranes were synthesized on two types of supporting materials, alumina (α-alumina) and yttria-stabilized zirconia (YSZ) coated alumina. Membranes were prepared by template-free secondary growth method with multiple growth steps in order to minimize intercrystalline gaps. Gas permeation characteristics, thermal and hydrothermal stability for MFI type zeolite membranes were exa...

In this work, artificial neural networks (ANNs) technique was used in the prediction of abrasive wear rate of Cu–Al2O3 nanocomposite materials. The abrasive wear rates obtained from series of wear tests were used in the formation of the data sets of the ANN. The inputs to the network are load, sliding speed, and alumina volume fraction. Correlation coefficients between the experimental data and...

agal2o3 nanocomposite were synthesized by solution combustion technique using ammonium carbonate as a new fuel under simultaneous combustion of alumina and silver particles condition. samples prepared with different amount of silver, were characterized by xrd, bet, sem and optical absorption measurements. xrd analysis was used to determine the change in phase and size of the synthesized nanopar...

*Correspondence: Mohammed Es-Souni , Institute for Materials and Surface Technology, University of Applied Sciences, Grenzstrasse 3, Kiel, Germany e-mail: [email protected] Supported anodized alumina template films with highly ordered porosity are best suited for fabricating large-area ordered nanostructures with tunable dimensions and aspect ratios. In this paper, we first discuss important issues...