Al alloy foams of composition Al-3wt.%Si-2%Cu-2%Mg was produced using powder metallurgical method. Mechanical properties of foams having different density were measured using uni-axial compression test and the measured properties such as elastic modulus and strength were compared with those of other existing commercial foams. The newly produced (Al-3%Si-2%Cu-2%Mg alloy) foams showed comparable ...

Based on the idea of alloying welding seams, a series of Zn-xAl filler metals was calculated and designed for joining Mg/Al dissimilar metals by gas tungsten arc (GTA) welding. An infrared thermography system was used to measure the temperature of the welding pool during the welding process to investigate the solidification process. It was found that the mechanical properties of the welded join...

because of low its thermal conductivity.[5,6] To the authors’ CELLULAR metals have been shown to experience knowledge, there have been no studies either in metals or fatigue degradation in both tension and compression.[1,2] This polymers of heat generated locally around stationary cracks degradation is manifested as a rapid increase in strain after subject to cyclic loading. a quiescent nucleat...

Blown-powder laser surface alloying was performed on the magnesium alloy AZ91D with Al-Si alloy powder to improve corrosion resistance. Characterization by scanning electron microscopy (SEM), energy dispersive spectroscopy (EDS) and x-ray diffraction (XRD) analysis revealed that intermetallic compounds (IMCs) of Mg2Si, Al12Mg17 and Al3Mg2 were formed in the matrix of α-Mg and Al solid solutions...

The evaluation of texture as a function of recrystallization has been characterized for directly cold rolled Al-6Mg, Al-6Mg-0.4Sc and Al-6Mg-0.4Sc-0.2Zr alloys. Samples were annealed isothermally at 400 °C for 1 to 240 minutes to allow recrystallization. Recrystallization kinetics of the alloys is analyzed from the micro-hardness variation. Isothermally annealed samples of aluminum alloys were ...

magnesium is potentially useful for orthopedic and cardiovascular applications. magnesium and its alloys are light, biodegradable, biocompatible metals that have promising applications as biomaterials. however, the corrosion rate of this metal is so high that its degradation occurs before the end of the healing process. one of the ways to improve the corrosion rate is to compose it with ceramic...

Physical phenomena underlying failure due to electromigration and stress-induced voiding in fine AI and AI-alloy thin-film conducting lines are examined in the context of accelerated testing methods and structures. Aspects examined include effects due to line isolation (the absence of reservoirs at conductor ends), solute and precipitate phenomena, conductor critical (Blech) length, microstruct...

DTA analysis was used to investigate the solidification reactions of alloy A319 with either 12 or 136 ppm of Sr added. Strontium does not affect primary solidification of (Al) dendrites but modifies the kinetics of the (Al)–Si eutectic. The effects of Sr level and of cooling rate on the characteristic temperatures for the (Al)–Si and other eutectic reactions are described.