P92 steel was irradiated with Ar ion up to 10 dpa at 200, 400, and 700 ◦C. The effect of Ar ion irradiation on hardness was investigated with nanoindentation tests and microstructure analyses. It was observed that irradiation-induced hardening occurred in the steel after Ar ion irradiation at all three temperatures to 10 dpa. The steel exhibited significant hardening at 200 and 700 ◦C, and slig...

Case hardening is a feature of dried wood that causes the wood to deform (cup) after re-sawing and equalising the moisture content. VTT has analysed case hardening with the aid of the simulation model PEO and with experimental drying, conditioning and storage tests. Case hardening cannot be predicted by the moisture content gradient alone. However, the case hardening gap after drying to a high ...

Ageing of 75% cold rolled Al-6Mg alloy with ternary 0.4 wt% scandium and quaternary zirconium and titanium has been carried out. Alloy samples are naturally, isochronally and isothermally aged for different time and temperatures. Hardness values of the differently processed alloys have been measured to understand the ageing behavior of Al-6Mg alloy with scandium and quaternary zirconium and tit...

Practical software hardening schemes are heuristic and are not proven to be secure. One technique to enhance security is robust combiners. An algorithm C is a robust combiner for speci cation S, e.g., privacy, if for any two implementations X and Y , of a cryptographic scheme, the combined scheme C(X, Y ) satis es S provided either X or Y satisfy S. We present the rst robust combiner for softwa...

The beam hardening effect is one of the major artifacts of X-ray computed tomography. It not only complicates medical inspection and material analysis, but also influences the accuracy and repeatability of dimensional measurements. Therefore, many efforts have been devoted to develop beam hardening correction methods since the early 1970s. In practice, the combination of hardware filters (pre-f...

Using molecular dynamics simulations of a generic model, we observe strain hardening in highly cross-linked polymer glasses under tensile deformation. We show that formation of microvoids, without bond breaking, constitutes the microscopic origins of strain hardening. A well-defined functional form is observed for the void size distribution that is consistent with voids in dense equilibrium Len...

In this work we introduce a cost-aware methodology for selective hardening of combinational logic cells, which provides a list of the most effective candidates for hardening. Two heuristics are proposed in order to define when selective hardening becomes unfeasible. The methodology and the heuristics are applied to a set of benchmark circuits using costs extracted from an actual standard cell l...

This document presents TLS and how to make it secure enough as of 2014 Spring. Of course all the information given here will rot with time. Protocols known as secure will be cracked and will be replaced with better versions. Fortunately we will see that there are ways to assess the current security of your setup, but this explains why you may have to read further from this document to get the u...

The goal of this research is to study the anisotropic material behavior during forming processes, represented by both complex yield loci and kinematic-isotropic hardening models. A first part of this paper describes the main concepts of the ‘Stress-strain interpolation’ model that has been implemented in the non-linear finite element code Lagamine. This model consists of a local description of ...

The three dimensional atom probe (3DAP) is the only tomography technique with an atomic resolution. Due this unique feature, it has been widely used in semi-quantitative compositional analyses of solute clusters and nanosized precipitates in alloys. Various microalloying effects in the precipitation processes of aluminum alloys have been investigated using the 3DAP. The most well-known example ...