To construct copper heap leaching structures, a stepped heap of ore is placed over an isolated sloping surface and then washed with sulphuric acid. The isolated bed of such a heap consists of some natural and geosynthetic layers. Shear strength parameters between these layers are low, so they form the possible sliding surfaces of the heaps. Economic and environmental considerations call for stu...

The fraction of municipal solid waste incinerator bottom ash with a particle size less than 8mm has been milled, formed into pellets and rapidly sintered in a rotary furnace at temperatures between 900 and 1080 ◦C. The effect of sintering temperature on density, water absorption and crushing strength has been determined. Sintering at temperatures between 1000 and 1050 ◦C produces pellets with p...

In power plant, coal ash obtained by combustion is mixed with river water and transported to the dump. Sequential extraction was used in order to assess pollution caused by leaching of elements during ash transport through the pipeline and in the storage (cassettes). A total of 80 samples of filter ash as well as the ash from active (currently filled) and passive (previously filled) cassettes w...

Composite manufacturing appears to be one of the most suitable recycling options for chromated copper arsenate (CCA)-treated waste wood. However, in many applications it would be beneficial to remove much or all of the CCA from the wood prior to composite production. This paper evaluates the effect of remediation processes, namely oxalic acid (OA) extraction and Bacillus licheniformis fermentat...

Recent studies have shown that handcrafted glass-clay containers are a health risk because they can be contaminated by heavy metals, which can be transferred to food, thus reaching the human body to potentially cause illness. Therefore, in the present work, we evaluate the leaching of lead, cadmium, and cobalt from glass-clay containers into two types of food: tomato sauce (salsa), and chickpea...

Acid leaching is an essential unit in hydrometallurgy, yet it time consuming and requires concentrated acids. Process intensification examined for the of valuable rare earth elements (REEs), such as Ni, Co, La, Nd, Ce, from spent nickel metal hydride (NiMH) batteries using subcritical water extraction (SWE) microwave-assisted (MAE). Results SWE revealed that HCl performed better than H2SO4 HNO3...

The residue from desulfurization and denitrification of exhaust gas treatment process with pyrolusite ore as absorbent is regarded as a potential source of iron and manganese. In this study, an extraction process is proposed for recovery of iron and manganese with ammonium sulphate roasting followed by sulphuric acid leaching. Firstly, the conversion mechanism was analyzed through mineral phase...

Basic properties of fly ash samples from different urban waste combustion facilities in China were analyzed using as X-ray fluorescence (XRF), scanning electron microscopy (SEM), X-ray diffraction (XRD). The leaching toxicity procedure and some factors influencing heavy metals distribution in fly ash were further investigated. Experimental results indicate that the fly ash structures are comple...

plant biomass harvested after heavy-metal phytoremediation must be considered as a hazardous waste that should be contained or treated appropriately before disposal or reuse. this study provides an evaluation of extractants for the removal of lead from abutilon theophrastus biomass. the research was carried out a leaching study to determine the lead-extraction efficiency of the different leacha...

in the present work, the extraction of zinc from a sphalerite concentrate using sodium nitrate as an oxidant in a sulfuric acid solution was investigated. the effective parameters such as the temperature, sulfuric acid and sodium nitrite concentrations, stirring speed, particle size, and solid/liquid (s/l) ratio were analyzed. the dissolution rate increased with increase in the sulfuric acid an...