In present work, prediction the effect of nose radius, rz (mm) on the equivalent strain (PEEQ) and surface finish during the machining of titanium alloy (Ti-6Al-4V) through orthogonal cutting process. The results were performed at several of the nose radiuses, rz (mm) while the cutting speed, vc (m/min), feed rate, f (mm/tooth) and depth of cut, d (mm) were remained constant. The equivalent pla...

Hand tool mechanisms designed to reduce the risk factors have rarely been studied. In this paper it is analyze trowel firstly designing in CATIA and then its Finite Element Analysis has been carried out by ABAQUS. The main emphasis is on finding stresses by using this software, then removing them by suitable mechanical working on tool & ergonomic change in the design of handle to make it more c...

The deformation behavior of a pH-sensitive hydrogel micro-fluidic valve system is investigated using inhomogeneous gel deformation theory, in which the fluid-structure interaction (FSI) of the gel solid and fluid flow in the pipe is considered. We use a finite element method with a well adopted hydrogel constitutive equation, which is coded in commercial software, ABAQUS, to simulate the hydrog...

The first publication of the work [1] did not present one of the authors' names. Kunalan Ganthel has now been added to the author list. In addition, Habib Sherkat has been added to the Acknowledgements, with thanks for providing help with the use of hyperelastic module of Abaqus Software. Prospects of implant with locking plate in fixation of subtrochanteric fracture: experimental demonstration...

A 3-dimensional finite element model is developed to simulate and analyze the temperature and degree of cure field of epoxy casting part during cure process. The present model based on general finite element software ABAQUS is verified by literature example and experimental data. The numerical results show good agreement with literature example and measured data, and are even more accurate than...

A cortical bone tissue is susceptible to fracture that can be caused by events, such as traumatic falls, sports injuries and traffic accidents. A proper treatment of bones and prevention of their fracture can be supported by in-depth understanding of deformation and fracture behaviour of this tissue in such dynamic events. Parameters such as damage initiation under impact, damage progression an...

Presented are 24 non-dimensional buckling curves to estimate the strengths of Fibre-Reinforced Polymer (FRP) square plates having four simply supported edges and subjected in-plane uniaxial uniform compression. The constructed by authors from a parametric numerical analysis using ABAQUS® software with changing variables for: material properties; initial geometrical imperfections; laminate lay-u...

Abstract The article studies the punching shear capacity of reinforced concrete slabs by simulation method. Based on Concrete Damage Plasticity (CDP) constitute model, model is established in Abaqus software. was verified comparison tests. parametric were implemented to investigate effect and steel strength resistance slab. slab also calculated formulas proposed available standards. Obtained re...

Abstract This paper investigates the low velocity impact performance of AA5083 using ABAQUS software. The resistance was measured in terms depth indentation created over AA5083. Low-velocity results indicates, that angle inclination resisting body have a great influence on properties. analysis study carried out for different orientations alloy plate with respect to horizontal datum namely 30°,6...