This paper includes investigations of power losses in monolithic buck dc-dc converter designed with Cadence on CMOS 0.35 μm process. Input voltage of the designed circuit is equal to 3.6 V and output voltage is regulated to 1.2 V. Evaluated and estimated are power dissipations in the MOS transistor, filter inductor and filter capacitor of the buck converter. Investigated and compared are losses...

A Double input DC to DC converter for low voltage energy sources applications is proposed in this paper. The proposed converter is buck-boost converter which can step up or step down the input voltage according to output voltage required at load end. The converter is able to boost up voltage of energy sources such as solar photovoltaic and wind energy system of relatively low voltage. The conve...

This paper presents a design study of a new topology for miniaturized bondwire transformers fabricated and assembled with standard IC bonding wires and toroidal ferrite (Fair-Rite 5975000801) as a magnetic core. The microtransformer realized on a PCB substrate, enables the build of magnetics on-top-of-chip, thus leading to the design of high power density components. Impedance measurements in a...

This paper presents the implementation of a bidirectional dc-dc converter to protect a battery from overcharging and undercharging. The proposed converter circuit provides low voltage stresses across the switches, higher step-up and step-down voltage gains and efficiency is also high when compared to conventional boost/buck converter. The proposed control circuit controls the charging and disch...

Copyright 2013 KIEEME. All rights reserved. This is an open-access article distributed under the terms of the Creative Commons Attribution Non-Commercial License (http://creativecommons.org/licenses/by-nc/3.0) which permits unrestricted noncommercial use, distribution, and reproduction in any medium, provided the original work is properly cited. pISSN: 1229-7607 eISSN: 2092-7592 DOI: http://dx...

Illumination non-homogeneity is the main problem which affects dense-array CPV systems. In a previous work we theoretically showed that connecting each cell in the array to a DC–DC converter module, leads to an increase of the power transfer efficiency with respect to classical series connection. This finding is here confirmed by two experiments making use of a cells’ array, one for a certain c...

This paper proposes a novel auto-reset forward DC-DC converter with inductor-switching technique to obtain the high performance by means of zero voltage switching and the fast transient response at steep load variations. The performance of the forward converter is strongly depending on the transformer reset-method. The Auto-reset method is used to recover the energy stored in leakage inductance...

In this paper, a novel high step-up DC-DC converter for distributed generation (DG) system is proposed. The concept is to utilize two capacitors and one coupled-inductor. The two capacitors are charged in parallel during the switch-off period and are discharged in series during the switch-on period by the energy stored in the coupled inductor to achieve high stepup voltage gain. In addition, th...

Sensitivity to carrier frequency offset (CFO) is one of the biggest drawbacks of orthogonal frequency division multiplexing (OFDM) system. A lot of CFO estimation algorithms had been studied for compensation of CFO in OFDM system. However, with the adoption of direct-conversion architecture (DCA), which introduces additional impairments such as dc offset (DCO) and in-phase/quadrature (I/Q) imba...

This paper presents a step up DC-to-DC converter with hybrid switch capacitor technique having high voltage conversion ratio with small switch voltage stress . The converter is suitable for the applications where high voltage conversion is required. The proposed DC-DC converter has low voltage ratted MOSFET switch and is connected to PV array to get high output voltage at small duty ratios. Hen...