Laboratory experiments were carried out on the kinetics and pathways of the electrochemical (EC) degradation of phenol at three different types of anodes, Ti/SnO2-Sb, Ti/RuO2, and Pt. Although phenol was oxidised by all of the anodes at a current density of 20 mA/cm2 or a cell voltage of 4.6 V, there was a considerable difference between the three anode types in the effectiveness and performanc...

Response of highly sensitive SnO2 semiconductor carbon monoxide (CO) gas sensors based on target gas CO quasi-molecular-imprinting mechanism design is investigated with gas concentrations varied from 50 to 3000 ppm. SnO2 nanoparticles prepared via hydrothermal method and gas sensor film devices SC (exposed to the target gas CO for 12 h after the suspension coating of SnO2 film to be fully dried...

Nanostructured electrodes with vertical alignment have been considered ideal structures for electron transport and interfacial contact with redox electrolytes in photovoltaic devices. Here, we report large-scale vertically aligned SnO2 nanochannel arrays with uniform structures, without lateral cracks fabricated by a modified anodic oxidation process. In the modified process, ultrasonication is...

In this study, novel porous hollow Ni/SnO2 hybrids were prepared by a facile and flexible two-step approach composed of solution reduction and subsequent reaction-induced acid corrosion. In our protocol, it can be found that the hydrothermal temperature exerts a vital influence on the phase crystal and morphology of Ni/SnO2 hybrids. Notably, the Ni microspheres might be completely corroded in t...

The development of highly efficient As(iii) adsorbents is critical to largely simplify the arsenic treatment process and lower its cost. For the first time, SnO2 nanospheres were demonstrated to possess a highly efficient As(iii) adsorption capability from water in a near neutral pH environment as predicted by the material criterion we recently developed for the selection of highly efficient ar...

Tin oxide (SnO2) thin films are widely used by solgel method. One of the most important factors that influence the sensitivities of sensing material is its structural properties especially surface morphology. In this work, we present preparation and characterization of undoped and antimony-doped tin oxide (Sb: SnO2) thin film nanostructures for gas sensing applications. The films were character...

In this paper mesoporous SnO2 nanospheres with an average diameter of about 83 nm, composed of many tiny primary particles ( 10 nm) and holes, are synthesized on a large scale by a simple hydrothermal route. The as-prepared mesoporous SnO2 nanospheres were uniformly coated with carbon by a further hydrothermal treatment in glucose aqueous solution. As anode materials for lithium-ion batteries, ...

Nanocrystalline SnO2 thin films were successfully prepared using sol-gel dip coating technique. The starting precursor was used as tin chloride dihydrate (SnCl2.2H2O), ethanol and glycerin. As the prepared films were fired at 500 o C. These films were characterized using XRD, FESEM and TEM to known crystal structure, surface morphology and microstructure property. Elemental composition was stud...

Subsolidus phase relationships in the Ga2O3–SnO2–ZnO system were determined at 1250 ◦C using solid state synthesis and X-ray powder diffraction. The two spinels, Zn2SnO4 and ZnGa2O4, formed a complete solid solution. The optical band gap of the spinel varied with composition from 3.6 eV (Zn2SnO4) to 4.7 eV (ZnGa2O4). All samples were white and insulating except those containing Ga-doped ZnO. Th...

Taking SnO2 quantum dots with random orientation as a precursor, NaOH induces self-assembly of SnO2 dots to form the nanowires, side-by-side attachment of which generates hierarchically ordered structures. The multistep oriented attachment mechanism can help to describe the oriented assembly of big nanocrystals.