The lap shear strength of chromic acid anodized, primed, Ti-6Al-4V alloy bonded with a high performance FM-5 polyimide adhesive has been investigated as a function of thermal treatment for selected times at various temperatures in air. The research findings indicate that the lap shear strength decreases with the increase in duration of the thermal treatment at constant temperature and with the ...

Present work aims at multi-mechanical surface treatment of Ti-6Al-4V based-miniplate implant manufactured by electrical discharge machining (EDM) for biomedical use. Mechanical surface treatment consists of consequent use of ultrasonic cleaning, rotary tumbler polishing, and brushing. Surface layers are analyzed employing scanning electron microscopy and energy dispersive X-ray spectroscopy. Al...

A low magnetic Zr-1Mo alloy was fabricated by a powder bed fusion (PBF) process using a fiber laser. The microstructure, surface morphology, and pore distribution of the as-built Zr-1Mo alloy were observed. Its magnetic susceptibility and Vickers hardness were evaluated by magnetic susceptibility balance and a microindentation tester, respectively. The as-built Zr-1Mo alloy mainly consisted of ...

Biological fixation of uncemented endosseous implants requires the apposition of bone onto implant’s surface in a process named osseointegration [1]. The present study examined bone tissue response to Ti-6Al-4V alloy implanted into the rat femurs over a long time range (3 days to 6 months). The progression of implants fixation in the cancellous bone of distal epiphysis and within the medullary ...

A recently developed ultra-hard boride-based material, AlMgB14, has been fabricated into a standard cutting tool geometry (TPG-222) and tested using single-point turning of Ti-6Al-4V. The initial testing was conducted to compare this new cutting tool’s performance relative to a WC-Co cutting tool. During the tests the boride-based inserts suffered catastrophic failure for a wide range of cuttin...

The production of customized Ti-6Al-4V ELI dental implants by electron beam melting technology makes it possible to mass produce customized dental implants which introduce a porous surface to promote better osseointegration. By fabricating the root-form implant and the abutment as one piece, the authors expect to eliminate fracturing at the abutment screw and prosthetic screw. This paper descri...

Measurement of the reversible hydrogen storage capacity of milligram Ti–6Al–4V alloy samples with temperature programmed desorption and volumetric techniques Jeff L. Blackburn a,∗, Philip A. Parilla a, Thomas Gennett b, Katherine E. Hurst c, Anne C. Dillon a, Michael J. Heben a a National Renewable Energy Laboratory, 1617 Cole Blvd, Golden, CO 80401, USA b Chemistry Department, Rochester Instit...

Fiber reinforced metal composites were fabricated by diffusion welding. The matrices used were commercially pure titanium (CPTi) and two kinds of titanium alloys (Ti-6A1-4V and Ti-21V-4A1), and the filaments were two kinds of SiC-CVD fiber. The structure and the distribution of elements in reaction zone between matrix and filament both in as-fabricated state and in heat-treated state were inves...