A 77 GHz microstrip antenna array with a small surface providing high side and grating lobe suppression is presented. This may serve as a starting point for 77 GHz automotive radar applications. Multiple Wilkinson dividers guarantee both impedance matching at the input port (TX) as well as low return loss for the incoming (RX) signal. Phase shifting is done by adjusting the level of the Wilkins...

An optimized 1×8 Vivaldi antenna array designed for the lower-band UWB (2-4 GHz) through-wall imaging systems has been developed. Tapered slot antennas were utilized as the array elements and optimized to have a compact size. A one to eight wideband Wilkinson power divider was designed and fabricated to compose the feed network for Vivaldi antenna array. Measured results of the manufactured Viv...

A new broadband in-phase power divider based on multilayer technology is presented. A simple design procedure is developed for the proposed multilayer power divider. An S-band four-way multilayer power divider was designed and measured. The simulated results are compared with the measured data, and good agreement is reported. The measured 15 dB return loss bandwidth is demonstrated to be about ...

Abstract—A compact dual-band power divider for GSM/DCS applications is proposed in this letter. Novel planar artificial transmission lines are applied to miniaturize the power divider and achieve wideband response. The proposed dual-band power divider is about 37% of conventional one. The design principle, simulated and measured results are all discussed. The measured results show that good per...

Background and Objectives: In this paper, a new design strategy was proposed in order to enhance bandwidth and efficiency of power amplifier. Methods: To realize the introduced design strategy, a power amplifier was designed using TSMC CMOS 0.18um technology for operating in the Ka band, i.e. the frequency range of 26.5-40GHz. To design the power amplifier, first a power divider (PD) with a ver...

In this paper, we present a new design of a compact tri-band unequal power divider, which is composed of a circularcoupling power divider and a triple-band resonator. The unequal power dividing characteristic is realized by two circular shaped microstrip lines coupled through a circular shaped slot. The triple-band resonator, which comprises a conventional half-wavelength resonator, a short stu...

This paper proposes a multiway power divider for wideband (4:1) beamforming arrays. The divider’s input reflection characteristic (S11) is achieved using a multisection stepped-impedance transformer. Moreover, the divider’s isolation (S32) bandwidth is increased by incorporating inductors and capacitors in addition to the conventional resistor only isolation networks of the divider. The analysi...

Abstract—In this paper, a general design of an equal-split N-way power divider, similar to Bagley polygon power divider, but with an even number of output ports is proposed. A circular-shaped 4way divider is designed and simulated using two different full-wave simulators. Very good matching at the input port is achieved, and good transmission parameters are obtained. After that, the same circul...