We report a comprehensive study of the gate-induced electromodulated transmittance of infrared light by single-walled carbon nanotube (SWNT) thin films. The observed electromodulation is significantly enhanced by utilizing large diameter SWNTs, increasing the ratio of semiconducting to metal SWNTs, and by decreasing the SWNT film thickness. The amplitude of the effect reported herein ( approxim...

Airbrushed single walled carbon nanotube (SWCNT) thin films with sheet resistivity <1 kX/ sq. and transparency >80% are used as electrodes for pentacene and regioregular poly(3hexylthiophene) (P3HT) thin-film transistors (TFTs). Airbrushed SWCNT electrodes show low contact resistance in a bottom-contact configuration, comparable to (in the case of P3HT) or lower than (in the case of pentacene) ...

Smooth and aligned single walled carbon nanotube (SWNT) thin films with improved optoelectronic performance are fabricated using a superacid slide casting method. Deposition of as made SWNT thin film on silicon (Si) together with post treatments result in SWNT/Si hybrid solar cells with unprecedented high fill factor of 73.8%, low ideality factor of 1.08 as well as overall dry cell power conver...

In this paper, the radial breathing mode (RBM) frequencies of multi-walled carbon nanotubes (MWCNTs) are  obtained based on the multiple-elastic thin shell model. For this purpose, MWCNT is considered as a multiple concentric elastic thin cylindrical shells, which are coupled through van der Waals (vdW) forces between two adjacent tubes. Lennard-Jones potential is used to calculate the vdW ...

The structure and transport properties of pit membranes at the interface between the metaxylem and xylem parenchyma cells and the possible role of these pit membranes in solute transfer to the phloem were investigated. Electron microscopy revealed a fibrillar, almost tubular matrix within the pit membrane structure between the xylem vessels and xylem parenchyma of leaf blade bundles in rice (Or...

Laser Powder Bed Fusion (LPBF) technologies such as Selective Melting (SLM) are being increasingly considered viable production routes. This paradigm change demands an in-depth understanding of the fabrication process and variables, previous studies have shown that energy density calculation alone is insufficient, because parts fabricated using similar density, but different combinations parame...

The fluid-structure interaction simulation of shockand detonation-loaded thin-walled structures requires numerical methods that can cope with large deformations as well as local topology changes. We present a robust level-set-based approach that integrates a Lagrangian thin-shell finite element solver with fracture and fragmentation capabilities and an Eulerian Cartesian fluid solver with optio...

A bi-criteria optimization is considered whose objectives are the maximization of the load sustained by a structure and the minimization of the structure's volume. As the objectives are conflicting, the solution to the problem is of the Pareto type. The problem is elaborated for a thin-walled column of cruciform cross-section, prone to flexural and torsional buckling. A numerical example is als...

Difficult machining characteristics of titanium alloy materials and low rigidity thin-walled component make Titanium Alloy Thin-Walled Component (TATWC) prone to chatter during machining, resulting in poor surface quality other defects, which restricts the expansion application TATWC special industrial field. The appearance Ultrasonic Vibration Assisted (UVA) milling method provides a new techn...

The time evolution of the growth process of vertically aligned single-walled carbon nanotubes (or V-SWNTs) on a flat substrate was examined by scanning electron microscopy (SEM), resonant Raman spectroscopy, and angle-resolved X-ray absorption near-edge structure (XANES). This detailed characterization gives evidence for the growth of a thin layer (crust) of randomly oriented single-walled carb...