Incorporation of liquid crystalline polymers (LCPs) into commodity polymers remains a challenge in the design of high-performance, low-cost polymeric blends. Blends of a thermoplastic polymer and a nematic LCP are produced here by mechanical alloying. Functionality sensitive X-ray microscopy reveals LCP dispersions as small as 100 nm in diameter. Intimate mixing remains upon subsequent melt pro...

Severe plastic deformation has the fascinating power of alloying equilibrium-immiscible elements, overriding the thermodynamic driving force (positive heat of mixing) that would dictate phase separation in equilibrium. This article briefly reviews the current understanding of this subject, in terms of experimental evidence for atomic-level alloying and phase selection, and in particular the mod...

A surface alloying technique is developed to enrich the internal surfaces of low‐carbon steel casting with nickel or and chromium. This unique involves incorporation (Ni), chromium (Ni + Cr), stainless (SS) powders into a slurry, then applying slurry onto cores used in sand molds which comes contact molten metal during casting. Various properties, including coating thickness, composition, micro...

the effect of rare earth (re) elements, including ce and la, on the sorption properties of zr-co getters was investigated in this work. the phase evolution, microstructural characteristics of getter powders were studied by means of x-ray diffraction method, scanning electron microscopy (sem) and energy dispersive x-ray spectroscopy (eds). the nanostructured zr3co intermetallic compound has been...

Mechanical alloying of Ti-Si and NiTi was performed by high-energy ball milling at ambient temperature. The structural and compositional evolutions during mechanical alloying were investigated. Results showed that the crystallite size of mechanically alloyed Ti-Si and Ni-Ti powders decreased with increasing milling time and the steady-state crystallite size was approximately 10 nm. The mechanic...

The effects of alloying on the lattice dynamics of vanadium were investigated using inelastic neutron scattering. Phonon densities of states were obtained for bcc solid solutions of V with 3d, 4d, and 5d transition metal solutes, from which vibrational entropies of alloying were obtained. A good correlation is found between the vibrational entropy of alloying and the electronegativity of transi...

In this study, Ti-5Al-2.5Fe alloy was prepared by powder metallurgy. The elemental titanium, aluminum, and iron powders were mechanically alloyed for 10 h in a vacuum atmosphere. A stainless steel jar and stainless steel balls were used for mechanical alloying. The alloyed powders were then sintered by vacuum hot pressing at 950 °C for a soaking time of 30 minutes. Pure titanium was also sinter...

This study investigated the structural stability and electrochemical properties of alloying additives M (M = Mn, V, Ti, Mo, or Ni) at the γ-Fe(111)/Cr2N(0001) interface by the first-principles method. Results indicated that V and Ti were easily segregated at the γ-Fe(111)/Cr2N(0001) interface and enhanced interfacial adhesive strength. By contrast, Ni and Mo were difficult to segregate at the γ...

In electrochemical energy conversion and storage, existing catalysts often contain a high percentage of noble metals such as Pt and Pd. In order to develop low-cost electrocatalysts, one of the effective strategies involves alloying noble metals with other transition metals. This strategy promises not only significant reduction of noble metals but also the tunability for enhanced catalytic acti...