A model for determining the permeability of fractural porous media based on the double percolation model is presented. The results are close to that by fractural permeability tensor model. The non-uniformity of the permeability and the pore pressure are investigated by parameter study. It is shown that rocks could be divided into “pore-controlling” permeability and “fracture-controlling” permea...

A protein concentrate (PC) was obtained from Grouper fish skin and it was used to prepare films with different amounts of sorbitol and glycerol as plasticizers. The best performing films regarding resistance were then modified with various concentrations of CaCl2, CaSO4 (calcium salts), and glucono-δ-lactone (GDL) with the purpose of improving their mechanical and barrier properties. These film...

The effect of V-notches or reentrant corners on fracture propagation has been analyzed for brittle materials, but not for quasibrittle materials such as concrete, marked by a large material characteristic length producing a strong size effect transitional between plasticity and linear elastic fracture mechanics. A simple size effect law for the nominal strength of quasibrittle structures with s...

This paper documents our effort to use a fully coupled hydro-geomechanical numerical test bed to study using low hydraulic pressure to stimulate geothermal reservoirs with existing fracture network. In this low pressure stimulation strategy, fluid pressure is lower than the minimum in situ compressive stress, so the fractures are not completely open but permeability improvement can be achieved ...

A major concern in development of fractured reservoirs in Enhanced Geothermal Systems (EGS) is to achieve and maintain adequate injectivity, while avoiding short-circuiting flow paths. The injection performance and flow paths are dominated by fracture rock permeability. The evolution of fracture permeability can be made by change in temperature or pressure induced rock deformation and geochemic...

In the present research, the mixed-mode fracture mechanics analysis in a plate with central hole under tensile loading is considered. It is assumed that a plate containing two symmetrical hole-edge cracks is bonded with two dissimilar planes. The stress intensity factors at the crack tips are calculated. The problem is modeled in Casca software and this model is analyzed with Franc software. Th...

Friction-permeability response of rock fractures is a fundamental issue in developing geo-energy extraction and storage. This review aims to summarize promote our understanding friction-permeability relationships for inspire us create robust solutions engineering puzzles. From perspective laboratory experiments, we the common methods provide state-of-the-art discussions on frictional instabilit...

A new test method has been developed to measure the resistance of dynamic fracture initiation in brittle materials under combined mode I/I loadings. The Brazilian disks with center-cracks have been fractured under oblique impact loadings in diarnetral-compression. The dynamic stress intensity factors of mode I and H are evaluated from the superposition integrals of the step response functions f...

Our previous work on mechanisms of femoral neck fracture demonstrated that the bone mineral density of femoral neck and Ward's triangle in patients with femoral neck fracture is less than those in the normal population [4]. Under similar loading condition, the stress can easily reach the ultimate strength level of bone and lead to fractures. The results indicated that osteoporotic patients with...