Addition of titanium (Ti) to ASTM A710 Grade B Cu-precipitation-strengthened steel significantly increases the impact absorbed fracture energy and reduces the ductile-to-brittle transition temperature. The effect of Ti correlates with the reduction of the amount of pearlite in the ferritic microstructure. A thorough study of the mechanical properties of Ti-modified A 710-B steel is presented.

The improvement and the capacity assessment of existing buildings has become the main topic of the last years so that different studies can be found devoted to damaged structures or structures not having a capacity compatible with the safety levels of the actual codes. Reinforced concrete framed structure buildings represent a conspicuous rate of the existing constructions so many efforts are a...

A short review for design consideration of two common materials used in facade and curtain walling is presented. The characteristics of light-weight facade enveloping a building are different from the conventional steel or concrete structures. Glass cannot crack like concrete and it is much more brittle than steel. Aluminum involves many buckling modes similar to but more common than steel. Owi...

In this chapter a particular image processing problem existing in quality assurance for steel industry is addressed. Since the quality standards in steel industry are ever increasing, even steel industry starts to use machine vision systems to monitor their product quality. In case of steel coils a particular figure of merit in quality is the roundness (ellipticity) or lack thereof of the coil....

The biodegradable inhibitors, which could effectively reduce the rate of corrosion of carbon steel, were investigated by potentiodynamic polarization and electrochemical impedance spectroscopy (EIS). The mixed-type inhibitors extracted from Eriobotrya japonica Thunb. leaf exhibited excellent inhibition performance, and the inhibition efficiency for carbon steel reached 90.0% at 298 K in hydroch...

This paper evaluates the treatment of textile dyeing wastewater by using steel scrap as adsorbents and heterogeneous catalysts for Modified Fenton oxidation. The efficiency of the process was explored as a function of the experimental parameters: pH, hydrogen peroxide concentration and Steel scrap content. The composites with high steel scrap content were effective to adsorb colour and COD in t...

M. Suliga, R. Kruzel, Czestochowa University of Technology, Czestochowa, Poland In the paper the influence of bidirectional bending on breaking force of steel cord has been assessed. Tests were carried out under laboratory conditions on three types of cord. It was found that bidirectional bending of steel cord cause the deterioration of strength properties and weakening of steel cord as a resul...

AE monitoring from various types of stress corrosion cracking (SCC) has been conducted for the past 15 years in our laboratory. This paper discusses AE results of active-path dissolution-type SCC of austenitic stainless steel in chloride solution and fused salt, fluoride and polythionic acid solutions, brass in ammonia (Mattosson's solution), and carbon steels in nitrite solution. Transgranular...

According to the characteristics of low-carbon steel pitting acoustic emission signal, one new characteristic analysis-WICA is proposed. The main idea of WICA is that based on the independent component analysis blind source separation technology as well as the wavelet transformation decomposition technology, proposed determines the low-carbon steel pitting source number according to the energy ...

The inhibitive and adsorptive properties of Sesmum indicum eco-friendly oil for stainless steel corrosion in hydrochloric acid was investigated using weight loss technique as well as electrochemical technique. The result has proved that the oil is excellent inhibitor for stainless steel in hydrochloric acid. The inhibition efficiency of oil for stainless steel increased with increase the amount...