This paper presents the influences on the entrainment of serpentines by grinding and reagents during copper–nickel sulfide flotation. The previous bench flotation tests were performed to extract the metallic values from the ore in Yunnan Mine, China and the relatively satisfied results with recoveries of 86.92% Cu, 54.92% Ni, and 74.73% Pt+Pd in the concentrate were harvested at their grades of...

Lead hydroxyl compounds are known as rutile flotation of the traditional activated component, but the optimum pH range for flotation is 2–3 using styryl phosphoric acid (SPA) as collector, without lead hydroxyl compounds in slurry solution. In this study, Bi3+ ions as a novel activator was investigated. The results revealed that the presence of Bi3+ ions increased the surface potential, due to ...

Copper smelting slags are hard materials. Therefore,to recover their copper by flotation method, grinding should be carried out to obtain optimal particle size. Copper smelting slags in the Bardeskan district, with work index of 16.24 kwh/st, were grinded for 65 minutes to reach an acceptable degree of freedom for the flotation tests, with particle size of 80%, smaller than 70 μm. With this gri...

A volcanic crust may be produced as a result of magma ocean processes. Solidification of a magma ocean naturally produces a silicate mantle with denser layers near the surface, therefore unstable to gravitational overturn. The mantle is predicted to rapidly flow in the solid state to gravitational stability. Hot buoyant silicate mantle rising from depth will melt through depressurization and er...

Flotation is, doubtless, the most important process among the various techniques used for the treatment of ore. This generalpurpose technique allows the treatment of several complex ores (lead zinc, copper zinc), sulphides (copper, lead, and zinc), oxides (hematite, quartz), oxidized minerals (malachite, cerusite) and even non-metal ores (fluorite, phosphate, coal). Due to the flotation, it is ...

Unburned carbon (UC) is the major source of organic contaminants in municipal solid waste (MSW) fly ash. So most organic contaminants can be removed by the removal of the UC from the MSW fly ash. In this paper, we first used a technique of column flotation to remove UC from MSW fly ash. The influences of column flotation parameters on the recovery efficiency of UC were systematically studied. I...

The mixed cationic collector cetyltrimethylammonium chloride (CTAC) and nonionic collector octanol (OCT) was found to exhibit a synergistic effect on the flotation and adsorption of muscovite. To understand the underlying synergistic mechanism, flotation, contact angle, surface tension, and adsorption measurements were carried out. The results obtained from flotation measurements indicated that...

The influence on impurity removal exerted by the application of flocculants in the phosflotation process has been investigated. A number of cationic flocculants are shown to enhance the removal of colour and starch. The use of flocculants did not influence the turbidity and conductivity ash of the clarified liquor. Changes in filterability and phosphate content of clear liquor resulting from th...

An atomic force microscope (AFM) has been used to conduct force measurements to better understand the role of hydrophobic forces in flotation. The force measurements were conducted between a flat mineral substrate and a hydrophobic glass sphere in aqueous solutions. It is assumed that the hydrophobic glass sphere may simulate the behavior of air bubbles during flotation. The results may provide...

A novel mineral slurry assaying method combining visible and near-infrared reflectance spectroscopy and traditional X-ray fluorescence has recently been developed. The improved method is capable of high-frequency assaying of slurry grades in zinc and copper flotation, thus being able to reveal possible rapid oscillations in the grades. In this study, the new measurements are used to detect osci...