The paper shows a test results of single cylinder, direct injected, self ignited dual fuel engine. One has analysed a combustion parameters calculated on base of recorded indicator diagrams. The comparison included: the ignition delay period, the cylinder pressure, the rate of pressure rise, the average medium temperature, the heat release rate, the total combustion time and the indicated effic...

It is very well known that the efficiency of an SI engine is limited by knock occurrence. As a compromise between knocking combustion avoidance and an accepted level of efficiency, an engine is typically operated at very close to the knocking boundary. However, the position of an engine knocking boundary is shifted if the fuel composition changes. The description of this abnormal combustion is ...

in this study the performance and emissions characteristics of a heavy-duty, direct injection, compression ignition (ci) engine which is specialized in agriculture, have been investigated experimentally. for this aim, the influence of injection timing, load, engine speed on power, brake specific fuel consumption (bsfc), peak pressure (pp), nitrogen oxides (nox), carbon dioxide (co2), carbon mon...

Availability changes with crank angle at the optimum engine operating point of 4000 rpm and WOT for CNG fuelling, CNG and gasoline engine operations at optimal engine conditions with the equivalence ratio Φ = 1.1, distribution of fuel availability of CNG and gasoline fuelled engine at equivalence ratio of Φ = 1.1, entropytemperature diagram for the engine optimal operating point and CNG fuellin...

Nitrogen oxides (NOx) contribute to a wide range of environmental effects including the formation of acid rain and destroy ozone layer. In-cylinder high temperature flame and high oxygen concentration are the parameters which affect the NOx emissions. The EGR system is a very effective way for reducing NOx emission from a diesel engine (via reduction of these parameters), particularly at the...

An experimental study is performed to investigate the fuel impingement on cylinder walls and piston top inside a directinjection spark-ignition engine with optical access to the cylinder. Three different fuels, namely, E85, E50 and gasoline are used in this work. E85 represents a blend of 85 percent ethanol and 15 percent gasoline by volume. Experiments are performed at different load condition...

In this study performance characteristics of ammonia engines using direct injection strategies are investigated. Ammonia is a carbon-free fuel, and thus its combustion does not produce carbon dioxide, a critical greenhouse gas. Ammonia can be produced by using renewable energy sources (e.g., wind and solar) and used as an energy carrier. Recent research also has shown that the efficiency of sol...