This paper describes a rapid prototyping (RP) technology for forming a hydroxyapatite (HA) bone scaffold model. The HA powder and a silica sol are mixed into bioceramic slurry form under a suitable viscosity. The HA particles are embedded in the solidified silica matrix to form green parts via a wide range of process parameters after processing by selective laser sintering (SLS). The results in...

In this research study, the effects of aluminum nitride (AlN) additive on the densification behavior and microstructure development of titanium diboride (TiB2) based ceramic matrix composite were investigated. In this way, a monolithic TiB2 ceramic and a TiB2–5 wt% AlN ultrahigh temperature ceramic composite were fabricated by spark plasma sintering (SPS) proces...

As the additive manufacturing (AM) industry continues to boom, the material palette continues to grow. However, the materials applicable to selective laser sintering (SLS) remains limited. Typically, the scanning laser beam heats each location for milliseconds at a time with a very high heating flux followed by quick cooling. This can create large temperature gradients and high local temperatur...

This study describes a conductive ink formulation that exploits electrochemical sintering of Zn microparticles in aqueous solutions at room temperature. This material system has relevance to emerging classes of biologically and environmentally degradable electronic devices. The sintering process involves dissolution of a surface passivation layer of zinc oxide in CH3 COOH/H2 O and subsequent se...

Selective laser sintering (SLS), which is a additive rapid manufacturing technique, it is capable of producing the required product directly and automatically from a 3D computer model representation, have been selected to build implant and scaffold structures using composite materials consisting of a polymer and a bioactive ceramic. Hydroxyapatite (HA), a bioceramic that encourages bone apposit...

This paper describes thermoelectric properties of La-doped SrTiO3 prepared by using a combination of combustion synthesis (CS) with post spark plasma sintering (SPS), on which effects of sintering temperature were mainly examined. In experimental, combustion-synthesized (CSed) samples (Sr1 xLaxTiO3, x 1⁄4 0:08) were spark-plasma-sintered (SPSed) at temperatures from 1513 to 1663K and the thermo...

the fuel cells are distinguished as generating of green allocable energy and are electrochemical devices of low environmental impact. porous nanocrystalline strontium-doped lanthanum manganite la0.8sr0.2mno3 (lsm) cathode materials were prepared by mechanochemical route in various grinding times. carbon black was employed to produce pores. the formation of lsm single phase was studied by x-ray ...

While preparing the composite preform in the powder metallurgy Lab, the various defects due to porosity, open crack and residual stresses are possible. This may lead to poor life and strength of materials. It is difficult to predict the defects in the form of pores physically in the powder metallurgy Lab. To simplify this kind of problem, the Scanning Electron Microscope (SEM) images are genera...

Electric arc furnace dust (EAFD) is generated in considerable amounts by the electric arc steelmaking process. During melting in an electric arc furnace, certain elements volatilize, and form fine dusts after cooling. The EAFD is collected in a baghouse and amounts to approximately 1–2 wt% of the steel produced.1) In China, about 800 million tons of steel was produced in 2015 with more than 9 w...

Sintering is a process by which a mixture of iron ores, fl uxes and coke is agglomerated in a sinter plant to manufacture a sinter product of a suitable composition, quality and granulometry to be used as burden material in the blast furnace. This process is studied and researched in the steelmaking industry in general, and in sinter plants in particular, as well as in universities and metallur...