We have constructed a new indirect ophthalmoscope. This instrument has a T-shaped housing composed of an illuminating tube and a viewing tube. A fiberoptic light source provides illumination. The inverted aerial image of the fundus coincides with the plane of the viewing window of the housing. This unit can be easily connected to a television camera for television ophthalmoscopy or to an image ...

Dielectric wakefield acceleration (DWA) presents us with means to achieve the accelerating gradient high above the limits of conventional accelerators. In a typical DWA scheme a higher energy lower charge main bunch is accelerated in the wakefield produced by a preceding lower energy higher charge drive bunch inside of a hollow metal-encapsulated dielectric tube. To make use of as much energy o...

The main objective of this research is to improvethe design and performance of the polyurethane foam-filled thin-walled aluminum grooved circular tubes using multi-response optimization (MRO) technique. The tubes are shaped with the inner and the outer circular grooves at different positions along the axis. For this aim, several numerical simulations using ABAQUS finite element explicit code ar...

development of new technologies and combined with creativity and innovation, plays the fundamental role in developing of any community′s value. thus, in this research the design and production of hydroforming device was introduced. one of the best and most efficient technologies in the world of metal forming is wind turbine blade producing with hydroforming method which seems as an innovative m...

In this paper, crashworthiness characteristics of conical steel tubes stiffened by annular rings and rigid polyurethane foam are investigated. For this purpose, wide circumferential rings are created from the outer surface of the conical tube at some determined areas along tube length. In fact, this method divides a long conical tube into several tubes of shorter length. When this structure is ...

This paper presents evaluation and effect of blank radius on radial stresses through mathematical formulations in hydroforming deep drawing process using castor oil medium. Hydraulic pressure can enhance the capabilities of the basic deep drawing process for making cups. In hydroforming deep drawing process, applying the hydraulic pressure on blank periphery in radial direction. It is obtained ...

A pumped storage stations model was set up and introduced in the previous paper. In the model station, the S-shaped characteristic curves was measured at the load rejection condition with the guide vanes stalling. Load rejection tests where guide-vane closed linearly were performed to validate the effect of the S-shaped characteristics on hydraulic transients. Load rejection experiments with di...

The tuned liquid column damper (TLCD) having a uniform cross-sectional tube of U-shaped, occupied with liquid is used as a vibrational response mitigation device. The tuned liquid column ball damper (TLCBD) is a modified TLCD, where, an immovable orifice, positioned at the middle part of the horizontal portion, is replaced by a metal ball. Different studies on the unconstrained optimization per...

In some engineering applications, it is very desirable that the heat exchanger as light possible while maintaining transfer rate at an acceptable level. this context, possibility of reducing weight with star-shaped fins by cutting off thermally least efficient part fin was investigated. For purpose, rear trimmed to Ø28, Ø31 and Ø34 mm. Numerical analysis used determine influence each variant on...

Abstract In this study, based on the energy balance for different components of a double-layered vacuum-tube solar collector with U-tube, thermal performance unit is investigated separately using an analytical and quasi-dynamic method. The model used in study determines temperature distribution longitudinal radial directions. research, effects physical parameters heat transfer including size co...