Introduction: The most important environmental problem of automotive industries is the produced wastewater due to its various processes. The flocculation and coagulation along with chemical sequestration are among important processes for removing contaminants from wastewaters. The aim of this study is to investigate the efficiency of coagulation and flocculation process along with chemical sequ...

this study examined the ability of the synthetic mordenite nanocrystal to remove tl(iii) and as(iii) from an aqueous solution. the determination of the concentration changes of h+ and oh- quantities in the acidic (ph 3) and alkali (ph 9) treated mordenite nanocrystals were done by the potentiometric titration curves. the maximum uptake capacities (qmax) of these metal ions using the mordenite i...

Textile wastewater contains substantial pollution loads in terms of Chemical Oxygen Demand (COD), Biological Oxygen Demand (BOD), Total Suspended Solids (TSS), Total Dissolved Solids (TDS) and heavy metals. Phytoremediation used for removing heavy metals and other pollutants by aquatic macrophytes treatment systems (AMATS) is well established environmental protective technique. A lab scale stud...

Increasing population and Industrialization are key pollutant contributors in water bodies. These wastes are highly hazardous for humansand ecosystem and require a comprehensive, effective treatment before discharge into water bodies. Over the years, many up gradations have been introduced in traditional water treatment methods which were expensive and ineffective especially for removal of heav...

the removal of copper (ii), zinc (ii), and chromium (iii) from wastewater by carrot residues(cr) was investigated to evaluate cation exchange capacity. the effects of solution ph and co- ions werestudied in batch experiments. adsorption equilibria were initially rapidly established, and then decreasedmarkedly after 10 min. column experiments were carried out in a glass column filled with cr toe...

Liquid membrane processes have attracted many interests in recent years for removal of heavy metals such as cadmium from industrial wastewaters. In this study, a modified hybrid liquid membrane system is introduced. The setup is worked by applying the water-insoluble dioctyl phthalate as the organic solvent. N-octanol and tetra butyl ammonium bromide are added to the organic phase to increase t...

use of electrokinetic technique for remediation of contaminated soils has recently been highly attended to, but there are still concerns regarding the effect of this process on soil microbial activity. in this study, changes in concentration of heavy metals extractable through 4n nitric acid, microbial biomass-c, and microbial coefficient, following electrokinetic remediation of a native soil c...

An enhanced electrokinetic process for removal of metals (Cr, Cu, Fe, Ni, Pb, Zn) from an industrial wastewater sludge was performed. The electrokinetic experiments were conducted under a constant potential gradient (1.25 V cm(-1)) with processing fluids of tap water (TW), sodium dodecylsulfate (SDS) and citric acid (CA) for 5 days. Results showed that metal removal efficiency of heavy metals f...

Ships transport about 80 percent of world trade and transfer approximately three to five billion tons of ballast water internationally every year. Due to the likely presence of pollutants, the ballast water discharged by ships can have negative effects on aquatic ecosystems. This study was conducted on 10 ships that entered the Bushehr port to determine the effectiveness of the ballast water ex...