In this research article we have proposed a new hybrid bridge resonant DC-DC converter with analog MPPT controller for the photo voltaic system in stand-alone load. The output of the photo voltaic panel is unregulated DC supply due to the change in weather conditions. The maximum power is tracked with respect to the temperature and irradiance level by using DC-DC converter. The logic truth tabl...

This paper presents a Hybrid Two Quasi Z-source(HTQZS) DC-DC converter for photovoltaic applications. These are mainly employed to full fill the demand of the voltage boost in photovoltaic applications from the lower value voltage. The traditional z source networks have some limitations in voltage boosting, so the modified z source means the different combination of the LC components is combine...

A compact dc/ac inverter for automotive is presented and experimented. The proposed inverter consists of fall bridge inverter and a new ZVCS quasi-resonant push pull dc/dc converter. The new dc/dc converter converts input 12 V (from battery) to high voltage (about) 200V at very high conversion efficiency without regulation. The high voltage will be converted to ac at the desired voltage and fre...

An AC/DC converter comprising a cycloconverter and a capacitively snubbered voltage source converter (VSC), coupled by a medium frequency transformer, offers significant advantages. Bidirectional AC/DC power flow as well as voltage transformation and isolation can be achieved. By mutual commutation of the converters, soft switching can be achieved for all semiconductors, thus, link frequency ca...

The paper presents a new STATCOM system based on H-bridge inverter. It can be used in mine power network. It has been commonly verified for the positive effects of SVG on the reactive power compensation and voltage fluctuation suppression. This paper focuses on a generalized structure of multilevel power converter where individual voltage sources are not necessarily the same. The cascade H-brid...

In this paper, H∞ loop-shaping control is applied to improve the performance of a buckboost dc-dc power converter based on pulse-width-modulation (PWM) techniques. Here, classical control techniques (i.e., proportional-integral-derivative (PID) control) and post-modern control techniques (i.e., H∞ control), are used to design the feedback loop of a buck-boost dc-dc power converter. The results ...

A method for systematic synthesis of quasi-resonant (QR) topologies by addition of resonant elements to a parent PWM converter network is proposed. It is found that there are six QR classes with two resonant elements, including two novel classes. More complex QR converters can be generated by a recursive application of the synthesis method. Topological definitions of all known and novel QR clas...

This paper introduces a bi-directional DC-DC converter with adaptive fuzzy logic controller (AFLC). Bi-directional power flow is obtained by the same power components and provides a simple, efficient, and galvanically isolated converter. In the presence of DC mains, the converter operates as buck converter, powers the down stream converter, and also charges the battery. When the DC mains fails,...

A novel off-line zero-voltage-switching(ZVS) PWM A C D C converter for single stage preregulation in distributed power system is proposed. The proposed A W C converter provides both of input power factor correction and direct conversion from 110-220VAC line to 48VDC bus with single power stage. Comparing to the conventional two-stage approach(boost rectifier followed by off-line DC/DC step down...

Using a top-down design methodology, two levels of hybrid electric vehicle power system are presented in the paper. At the highest abstraction level, a behavior modeling method is used to develop models for 3-phase AC/DC converter and brushless DC motor controller, which reduce the simulation time without compromise of accuracy. At the second level of design, six diodes along with delta-delta a...