A one-step method which involves exfoliating graphite materials (GIMs) off into graphene materials (GEMs) in aqueous suspension of CL-20 and forming CL-20/graphene materials (CL-20/GEMs) composites by using ball milling is presented. The conversion of mixtures to composite form was monitored by scanning electron microscopy (SEM) and powder X-ray diffraction (XRD). The impact sensitivities of CL...

SUVA (equivalent to UV254/DOC) value in raw water is a precursor for the formation of trihalomethane during chlorination at a water treatment plant. This study collected rapidly filtered water from an advanced water treatment plant for use in experiments on raw water. The removal rate of treating the trihalomethanes formation potential (THMFP) was conducted by using a biological activated carbo...

This paper presents the review of the effects of operating parameters on the photocatalytic degradation of textile dyes using TiO2-based photocatalysts. It further examines various methods used in the preparations of the considered photocatalysts. The findings revealed that various parameters, such as the initial pH of the solution to be degraded, oxidizing agents, temperature at which the cata...

Bismuth plays important roles in promoting the oxidation of alcohols towards high-valueadded chemicals over a noble metal loading catalyst. Herein, Mg–Al hydrotalcite-supported platinum–bismuth nanoparticles (Pt–Bi/HT) were prepared by the co-impregnation method and used in the selective oxidation of glycerol towards dihydroxyacetone (DHA). The incorporation of Bi species into Pt/HT significant...

The cold compaction of an aggregate of powder is treated from the viewpoint of crystal plasticity theory. The contacts between particles are treated as compaction planes which yield under both normal and shear straining. The hardening of each plane represents both geometric and material hardening at the contacts between particles; the macroscopic tangent stiffness can be written in terms of the...

A twin system for hydrogen-isotope absorption experiments has been constructed to replicate the phenomenon of heat and He generation during D2 gas absorption in nano-sized Pd powders reported by Arata and Zhang, and to investigate the underlying physics. For PdZr oxide nano-powders, anomalously large energies of hydrogen isotope absorption, 2.4 0.2 eV/D-atom and 1.8 0.4 eV/H-atom, as well as...

OWEN, CHARLES A., JR., and JANE B. HAZELRIG. Copper deJi&nc~ and copper toxicify in the rat. Am. J, Physiol. 215(Z) : 334-338. I968.-Changes in metabolism of an intravexmusly injected tracer dose of 64Cu were measured in Sprague-Dawley rats subjected to copper loading, by addition of cupric acetate to the drinking water, or made copper deficient, by use of a milk-powder diet and copper-free wat...

−Highly loaded and dispersed Pt/C catalysts, used as cathodic electrocatalysts in low temperature fuel cells, were prepared using a new method involving the slow addition of a Pt precursor to a solution containing dispersed carbon powder and a reducing agent. During this process, the added Pt precursor was reduced instantaneously into fine particles and adsorbed onto the carbon surface in the s...

NiTi wires were brazed together via eutectic reaction between NiTi and Nb powder deposited at the wire contact region. Phase transformation and deformation behavior of the NiTi-Nb eutectic microstructure were investigated using transmission electron microscopy (TEM) and cyclic loading-unloading tests. Results show that R phase and B19' martensite transformation are induced by plastic deformatio...

A new approach based on pulse electrodeposition is demonstrated to be an attractive technique to replace conventional powder type membrane electrode assembly (MEA) preparation methods. The performance of the catalyst layer is optimized by controlling the pulse deposition parameters such as the peak current density, duty cycle and the total charge density. The peak current density and the pulse ...