The floating gas-solid fluidized bed (FGSFB) is a large-particle fluidized bed confined in a tapered column with inserted grids. By application of two types of particles in an FGSFB, a wide variety of operations can be carried out. The visual appearance and the hydrodynamic behaviour of such binary FGSFBs is reported in this paper. Two extreme types of behaviour were observed in the experimenta...

PURPOSE To examine the effect of particle size and surface characteristics on colloidal particle uptake from subcutaneous tissue into the lymphatic system. MATERIALS AND METHODS Perfluorocarbon emulsion ZY13163 (median particle diameter, 0.08 micron; surfactant, egg yolk phospholipid), ZY13164 (median particle diameter, 0.36 micron; surfactant, egg yolk phospholipid), ZY13199 (0.18 micron, su...

This study deals with the particle size measurement of nine aerosol metered dose inhalers. Calibration was made possible by the use of a laser particle velocimeter (aerodynamic Particle Sizer from TSI). The count median aerodynamic diameters (CMAD) show little variation, from 0.63 to 0.73 micron, with standard deviations (sigma g) between 1.2 and 1.8. Aerodynamic diameter aerosol diagram analys...

Miniemulsification and emulsion/solvent evaporation techniques were combined to produce poly(3-hydroxybutyrate-co-3-hydroxyvalerate) (PHBV) nanoparticles. Those nanoparticles were prepared with different PHBV molar masses and PHBV concentrations to verify their effect on the final particle size. Nanoparticles with an average diameter of 133 nm were obtained when a low molar mass (Mw = 44,350 g/...

High solid content poly (styrene-co-butyl acrylate) latex ( with 20% and 40% solid content) including high amounts of Cloisite 30B (7 wt% and 10 wt%) were kinetically investigated. Gravimetric method via measuring the rate of polymerization, number of particles and average number of radicals per particle was used. Results showed that by increasing the solid content; the average diameter of poly...

Experimental heat transfer studies were carried out in 50.8 mm diameter packed beds of glass beads percolated by water and heated from the wall. The tube-to-particle diameter ratio (D/dp) ranged from 1.72 to 13.7 and the water flow rate from 1.1 to 9.9 l/min. Bed heights ranged from 100 mm to 700 mm. The radial temperature was measured above the bed surface by five aligned sheathed thermocouple...

We newly synthesized various sized gold nanoparticles covered with photochromic polymers consisting of diarylethenes with various structures to investigate an effect of the gold nanoparticles on the photocycloreversion reaction of the diarylethene chromophores upon irradiation with visible light. The gold nanoparticles covered with the photochromic polymers exhibited reversible changes in local...

In this study, we have analyzed the morphogenesis of the birnavirus infectious pancreatic necrosis virus throughout the infective cycle in CHSE-214 cells by using a native agarose electrophoresis system. Two types of viral particles (designated A and B) were identified, isolated, and characterized both molecularly and biologically. Together, our results are consistent with a model of morphogene...

The solid-state nuclear track detector CR-39 is widely used as a detecting mechanism in physics experiments as well as for industrial purposes such as neutron dosimetry and radon detection. The upper limit of detectable charged-particle fluence on CR-39 is set by physical overlapping or ‘pulse pileup’ of particle tracks on the surface. In the low-overlap regime the overlapping fraction of track...

A pulsed vacuum arc discharge emits a plasma as well as macroparticles in the form of micron-sized molten droplets of cathode material. Due to their trajectory and size, these macroparticles often pose a contamination threat for both spacecraft-based thrusters, and thin film deposition systems. The charge of these macroparticles was experimentally measured, and compared to a model based on ther...