Cylindrical thin-walled tubes due to construction and easy installation, high energy absorption capacity are used in the automotive industry as an impact energy absorber. However, the main weakness of cylindrical tubes is in the high initial peak load. Therefore, in this paper, to overcome this weakness, a buckling initiator is used at the top of the tube. This buckling initiator is a steel rod...

In this study, we try to develop a calibration method of control parameters included in a Monte Carlo simulation model which generates time series data for software reliability assessment. The control parameters are calibrated so as to minimize the mean sum of squared errors between the actual observed data and the generated ones. As a result, the proposed method enables us to use the simulatio...

most of river engineering problems are complicated and need to be analyzed by three dimensional models of flow and sediment transport. considering the fact that computers and numerical methods with great ability of flow and sediment transport simulation are developing quickly, using numerical modeling by engineers is inevitable. nevertheless, before application, numerical models need to be veri...

Up to now a large number of models have been developed to measure or predict the damage in equipments. Some of these models have been implemented in ABAQUS software. To implement damage parameters in the software, it is necessary to perform complex and expensive practical tests. One of these damage models is Forming Limit Diagram (FLD).The purpose of this research is deriving required parameter...

in this paper the critical strain energy release rate for t300/913 carbon-epoxy laminated composites has been studied using ansys finite element software based on virtual crack closure technique ( vcct ). compact tension ( ct ) specimen has been used for numerical analyses and the geometrical dimensions have been extracted from the existing references. the results obtained from the finite eleme...

the objective of this study was to develop a numerical model for the prediction of temperature distribution, effective plastic strain distribution, and especially material flow in friction stir welding of copper plates. the deform-3d software was used by incorporating a lagrangian incremental formulation. threedimensional results of the material flow pattern which were extracted using the point...

The one dimension computational model of a sequential injection engine, which runs on compressed natural gas (CNG) with spark ignition, is developed for this study, to simulate the performance of gas flow pressure profile, under various speed conditions. The computational model is used to simulate and study of the steady state and transient processes of the intake manifold. The sequential injec...