The radiological properties of nanocomposite Fricke gel (NC-FG) dosimeters prepared with different concentrations of nano-clay, perchloric acid and ferrous ions in deaerated conditions were investigated under carbon and argon ion beam irradiation covering a linear-energy-transfer (LET) range of 10 to 3000 eV/nm. We found that NC-FG exhibits radiological properties distinct from those of convent...

Based on the constraint and position identification (CPI) approach for synthesizing XYZ compliant parallel mechanisms (CPMs) and configuration modifications, this paper proposes a new fully-symmetrical XYZ CPM with desired motion characteristics such as reduced cross-axis coupling, minimized lost motion, and relatively small parasitic motion. The good motion characteristics arise from not only ...

Sn–9Zn solder joints containing Ag nano particles were prepared by mechanically mixing Ag nano particles (0.3, 0.5 and 1 wt%) with Sn–9Zn solder paste. In the monolithic Sn–Zn solder joints, scallop-shaped AuZn3 intermetallic compound layers were found at their interfaces. However, after the addition of Ag nano particles, an additional uniform AgZn3 intermetallic compound layer well adhered to ...

We report a fast neutron and gamma induced radiation dose and flux monitoring study during the nano-particle production at the proton beam irradiation facility. The monitoring results will be used for understanding of the activation of irradiated samples and the effect to the nano-particle production. A cylindrical shape of BC523A liquid scintillator was used for the fast neutron and gamma moni...

Thermal buckling behavior of functionally graded Euler-Bernoulli beams in thermal conditions is investigated analytically. The beam with material and thermal properties dependent on the temperature and position is considered. Based on the transformed-section method, the functionally graded beam is considered as an equivalent homogeneous Euler-Bernoulli beam with an effective bending rigidity un...

As a representative advanced imaging technique, the digital image correlation (DIC) method has been well established and widely used for deformation measurements in experimental mechanics. This methodology, both 2D and 3D, provides qualitative and quantitative information regarding the specimen’s non-uniform deformation response. Its full-field capabilities and non-contacting approach are espec...

Fixed multi-beam base stations can significantly increase the capacity of WCDMA systems. Previous capacity studies have not included important Radio Network Algorithms (RNA) such as Admission Control (AC) which are essential to guarantee an acceptable Quality Of Service (QoS). Some of these RNA may have to be changed to secure the full gains of fixed multi-beam antennas. In this paper two downl...

A beam-steering antenna based on non-uniform metasurface superstrate and artificial magnetic conductor (AMC), operating at 3.5 GHz, is proposed. The can steer the beam along ? = ?18° 18° with 0° in absence of almost zero scan loss. proposed structure consists a top layer made 20 × grid electrically-small square-shaped metallic pixels while bottom part AMC 5 pixels. radiating element, CPW-fed mo...

We present the fabrication and optical characterization of nano-scale solid immersion lenses (nano-SILs) with sizes down to a subwavelength range. Submicron-scale cylinders fabricated by electron-beam lithography (EBL) are thermally reflowed to form a spherical shape. Subsequent soft lithography leads to nano-SILs on transparent substrates, i.e. glass, for optical characterization with visible ...

Laser forming is a modern process which is mainly used for forming metals. Different Lasers are used in this regard that includes Nd: YAG and CO2. In this study, forming bi-layer sheets of Aluminum/Ceramic by Laser was investigated. Furthermore, effect of Uniform and Gaussian heat flux distribution in different power, velocity, and beam diameters on bending angle was studied. FEM simulation ind...