This paper is concerned with numerical studies of the anode region of a high-intensity argon arc. The anode region is divided into three subzones: the anode boundary layer, the presheath and the sheath. The governing equations of the dominating processes with the boundary conditions taken from the solutions of LTE plasmas are solved by applying the Runge±Kutta procedure. One parameter h, i.e., ...

The Reble accelerator at Sandia Laboratories is described. This accelerator was developed to provide an experimental source for studying the relevant diode physics, bea.m propagation, beam energy deposition in a gas using a radially converging e-bea.m. The nominal parameters for Reble are 1 WI, 200 kA., 20 ns e-bea.m pulse. The anode and cathode are concentric CY.linders with the anode as the i...

High-Performance Alkaline Direct Methanol Fuel Cell using a Nitrogen-Postdoped Anode Report Title A commercial PtRu/C catalyst postdoped with nitrogen demonstrates a significantly higher performance (?10–20?% improvement) in the anode of an alkaline direct methanol fuel cell than an unmodified commercial PtRu/C catalyst control. The enhanced performance shown herein is attributed at least parti...

Development of alternative propellants for Hall thruster operation is an active area of research. Xenon is the current propellant of choice for Hall thrusters, but can be costly in large thrusters and for extended test periods. Condensible propellants may offer an alternative to xenon, as they will not require costly active pumping to remove from a test facility, and may be less expensive to pu...

Polymer solar cells (PSCs) with different anode buffer layers were fabricated to investigate dipoleassisted hole extraction on the performance improvement of PSCs. The power conversion efficiency (PCE) of PSCs was increased from 4.77% to 6.18% with 29.6% improvement due to the increased short circuit current density (Jsc) from 12.00 to 15.65 mA/cm 2 induced by the oriented LiF dipole-assisted h...

The direct formic acid fuel cell is an emerging energy conversion device for which palladium is considered as the state-of-the-art anode catalyst. In this communication, we show that the activity and stability of palladium for formic acid oxidation can be significantly enhanced using nickel phosphide (Ni(2)P) nanoparticles as a cocatalyst. X-ray photoelectron spectroscopy (XPS) reveals a strong...

Single-chamber solid oxide fuel cells ~SOFCs! with an anode-supported Ce0.9Gd0.1O1.95 electrolyte were operated in a mixture of butane and air at furnace temperatures of 200-300°C. The electromotive force ~emf! of the cell and the voltage drop were strongly influenced by the catalytic activity of the anode for the partial oxidation of butane. The promotion of hydrogen formation by the addition ...

A multidimensional biofilm model is developed to simulate biofilm growth on the anode of a Microbial Fuel Cell (MFC). The biofilm is treated as a conductive material, and electrons produced during microbial growth are assumed to be transferred to the anode through a conductive biofilm matrix. Growth of Geobacter sulfurreducens is simulated using the Nernst-Monod kinetic model that was previousl...

Si has been considered as one of the most attractive anode materials for Li-ion batteries (LIBs) because of its high gravimetric and volumetric capacity. Importantly, it is also abundant, cheap, and environmentally benign. In this review, we summarized the recent progress in developments of Si anode materials. First, the electrochemical reaction and failure are outlined, and then, we summarized...

The development of new anode materials having high electrochemical performances and interesting reaction mechanisms is highly required to satisfy the need for long-lasting mobile electronic devices and electric vehicles. Here, we report a layer crystalline structured SnP3 and its unique electrochemical behaviors with Li. The SnP3 was simply synthesized through modification of Sn crystallography...