With the continuous development of national economy, big gear was widely applied in metallurgy and mine domains. So, big gear plays an important role in above domains. In practical production, big gear abrasion and breach take place often. It affects normal production and causes unnecessary economic loss. A kind of intelligent test method was put forward on worn big gear mainly aimed at the big...

abstract: a continuously variable transmission (cvt) is a transmission which may change step less by way of an infinite variety of effective gear ratios between maximum and minimum values. this contrasts with different mechanical transmissions that solely permit just a few different distinct gear ratios to be selected. continuously variable transmissions (cvts) are mechanical devices that allow...

Nonlinear dynamic model of the coupled lateral-torsional vibrations of a gear transmission system is developed, in which time-varying gear meshing stiffness, errors, and gaps are considered. The fundamental rules of the system’s multi-harmonic dynamic response have been obtained based on the time domain diagram, frequency domain diagram, phase plot, and Poincaré map. Therefore, estimation of th...

Gearboxes are one of the most power dense systems used today, and in certain instances their limiting factor is the ability to evacuate heat from the gear contact. This work analyses the efficiency (i.e. heat generation) and tooth temperature in the three lubricating conditions dip, into mesh spray and out of mesh spray for superfinished gears which are then compared to ground gears. A back-to-...

Landing gear is one of the critical subsystems of an aircraft. The need to design landing gear with minimum weight, minimum volume, high performance, improved life, and reduced life cycle cost have posed many challenges to landing gear designers and practitioners. Further, it is essential to reduce the landing gear design and development cycle time while meeting all the regulatory and safety re...

This paper describes an upper bound analysis of cold forward extrusion of spur gears with modified tooth profile. Spur gear geometrical parameters such as module, number of teeth, pressure angle, bore radius and addendum modification factor were input to a computer program written in Visual Basic. Then spur gear, billet and extrusion die cavity were modeled automatically in SolidWorks. For uppe...

This work aims to study the aggregation of dimensional errors in the reengineering processes using 3D scanning and printing without initial design drawings. A 57-tooth spur gear is used as an example to facilitate the discussion. Two approaches are investigated. The first one builds the gear model based upon measurement taken from a caliper, and the second approach uses a 3D scanner to collect ...

A gear transmission dynamic model for the gear dynamic contact loading, dynamic contact stress state and dynamic contact strain state analysis is presented. A dynamic model of the transmission with four degrees of freedom is used. The transmission is analyzed using nonlinear finite elements contact formulation, using a novel software modules developed by the author used for the generalized anal...