Nanofiltration (NF) has become a widely accepted process not only for producing drinking water but also for recovering wastewater in industrial processes or removing pollutants from industrial wastewater effluent. In the textile industry, the treatment of various dye baths with NF at room temperature have already been studied and was found feasible at lab-scale and pilot scale. The aim of this ...

The elimination of Reactive Red 120 (RR120) from synthetic solution using biochar generated Ulva prolifera was investigated. process parameters sorbent dose (A), pH (B), initial dye concentration (C), and temperatures (D) were optimized response surface methodology (RSM). To estimate the removal effectiveness with best 27 trails, Box-Behnken method (blocked) utilised. Analysis variance (ANOVA),...

Approximately 10-20% of the total dyes in the world is consumed in the textile industry. The present study aimed to investigate the photocatalytic activity of zinc oxide nanoparticles (ZnO) immobilized on synthetic activated carbon in the removal of the acid blue 113 dye from aqueous solutions. This experimental study was conducted in a photo-reactor with the useful volume of one liter. The eff...

in the present work the magnitudes of pigments in the synthetic leather, were measured by means of scanner. initially synthetic leather samples pigmented by three different pigments of yellow, blue and red colors were prepared. then the pigmented samples were scanned, and the values of rgb of images were calculated. the artificial neural network (ann) method used to make relation between rgb va...

To optimize live cell fluorescence imaging, the choice of fluorescent substrate is a critical factor. Although genetically encoded fluorescent proteins have been used widely, chemical fluorescent dyes are still useful when conjugated to proteins or ligands. However, little information is available for the suitability of different fluorescent dyes for live imaging. We here systematically analyze...

Background and purpose: Dyes are one of the main pollutants in the various industrial wastewaters. Therefore, the aim of this study was to assess the biosorption of acid red 18 dyes from aqueous solutions by brown macroalgae biomass “Sargassum glaucescens.” Materials and Methods: This research was a lab study. S. glaucescens was used as an adsorbent to remove acid red 18. The effect...

Herein, magnetic cobalt ferrite nanoparticles (CFNPs) was synthesized and its surface was modified by cationic surfactant (cetyltrimethyl ammonium bromide: CTAB) and its potential to selective removal of dye from multicomponent (ternary) system was investigated. Direct red 31 (DR31), Direct green 6 (DG6) and Direct red 23 (DR23) were used as a model dyes. The characteristics of the synthesi...

In this study, the MgCl2/red mud system (MRM) was used to investigate the color removal efficiency of dye solutions. Parameters such as the effect of the dosage of red mud (RM) and MgCl2 have been studied. The effect of pH on the conversion rate of Mg2+ has also been studied. The color removal efficiency of MRM was compared with that of PAC/RM and PAC/NaOH. Meanwhile, the color removal efficien...

this publication uses a colorimetric method based on the absorbance spectra of dye solutions to improve on beer’s law when calculating the dye concentrations of a three-component mixture. the performance of the new method is compared with that of beer’s law evaluated at three wavelengths, and beer’s law evaluated at 16 wavelengths. colorimetric method gives the best prediction of dye concentrat...

Congo red, which has a complex molecular structure with various diazo aromatic groups, is widely used in textile industry as an anionic dye. The purpose of this study was to investigate the degradation of Congo red in laboratory solution which had the chemical properties of the rinse waters of textile manufacturing dye-houses and the samples with Congo red alone wastewater by ozonation and to o...