signed digit (sd) number systems provide the possibility of constant-time addition, where inter-digit carry propagation is eliminated. such carry-free addition is primarily a three-step process; adding the equally weighted sds to form the primary sum digits, decomposing the latter to interim sum digits and transfer digits, which commonly belong to {–1, 0, 1}, and finally adding the transfers to...

in this research work, the dissolution of chalcopyrite was investigated under atmospheric pressure, with sulfate media at low temperatures, in 30°c to 50°c. in the galvanic interaction between chalcopyrite and pyrite, pyrite is used as a leaching catalyst. effects of different parameters such as temperature, stirring speed, pyrite to chalcopyrite ratio, particle size, and solution potential wer...

Induction motors (IMs) are widely used in many industrial applications due to their robustness, low cost, simplicity and relative good efficiency. One of the major considerations for IMs is their speed control. PI (proportional-integrator) controllers are usually used as speed controller. Adjusting the gain of PI controller is time-consuming which needs thorough considerations. Hence, fuzzy con...

We want to study thermal corrections on the speed of light at low temperature considering temperature dependence of photon vacuum polarization tensor at two-loop level in the standard QED‎. It is found that the heat bath behaves as a dispersive medium for the propagation of light and reduces its speed proportional to the second order of temperature‎. ‎Similarities and differences‎, ‎in light ...

mixing conditions of nbr/pvc nanocomposites such as mixing temperature, rotor speed and mixing time are determining parameters in rheological, mechanical and morphological properties of the compound. three levels were chosen for each parameter using design expert software via box-behnken method. the nanocomposite samples were melt-mixed in brabender internal mixer. the effect of various mixing ...

This paper suggests novel sensorless speed estimation for an induction motor (IM) based on a stator current model reference adaptive system (IS-MRAS) scheme. The IS-MRAS scheme uses the error between the reference and estimated stator current vectors and the rotor speed. Observing rotor flux and the speed estimating using the conventional MRAS technique is confronted with certain problems relat...

This paper presents a novel RF MEMS (Micro Electromechanical System) fixed-fixed switch for very fast switching. Using the obtained equations, the switching time depends on the stiffness and effective mass of the switch beam so that the switching time will be decreased by higher stiffness (spring constant) and lower effective mass. In new design, the suspension bridge is a three-layer beam so t...

High-speed centrifugal pumps with low specific speed have the characteristics of a small flowrate, high head, and being compact light weight, making them promising candidates for applications in thermal management aerospace electronic devices. The energy loss pump is critical complex due to large impeller diameter, narrow long flow channel, outlet width. In this paper, an analysis method based ...

Signed digit (SD) number systems provide the possibility of constant-time addition, where inter-digit carry propagation is eliminated. Such carry-free addition is primarily a three-step process; adding the equally weighted SDs to form the primary sum digits, decomposing the latter to interim sum digits and transfer digits, which commonly belong to {–1, 0, 1}, and finally adding the tra...