Ferula orientalis L. stalks were used as an agricultural solid biomass waste for preparation of activated carbon with zinc chloride activation using slow pyrolysis in a fixed-bed reactor. The chemical characteristics of the activated carbon obtained at 550 C were identified by elemental, fourier transform infrared spectroscopy, Brunauer–Emmett–Teller, scanning electron microscopy analyses and f...

The removal ofxylenol orange from aqueous solution onto the coal ash was investigated at room temperature. The results show that the adsorption capacity of xylenol orange increased as the adsorption time increased and then equilibrium established after 30 min adsorption time. The results obtained revealed that the coal ash removed about 80 % of xylenol orange from the aqueous solution withi...

The effect of natural organic matter (NOM) on arsenic adsorption by a commercial available TiO(2) (Degussa P25) in various simulated As(III)-contaminated raw waters was examined. Five types of NOM that represent different environmental origins were tested. Batch adsorption experiments were conducted under anaerobic conditions and in the absence of light. Either with or without the presence of N...

a chelating resin is prepared by condensation polymerization of aniline with formaldehyde andcharacterized by ft-ir, elemental analysis and studied for the preconcentration and determination of traceplatinum ion from environmental water sample using inductively coupled plasma-atomic emission spectroscopy(icp-aes). the optimum ph value for sorption of the metal ions was 5. the maximum adsorption...

Dendrimers are novel nanostructure materials that possess a unique three-dimensional molecular configuration. They have high adsorption capacities of heavy metals. Dendrimer-conjugated magnetic nanoparticles (Gn-MNPs) combining the superior adsorbent of dendrimers with magnetic nanoparticles (MNPs) have been developed for effective removal and recovery of Zn(II). In this study, the Gn-MNPs were...

A new biosorbent was developed by coating chitosan, a naturally and abundantly available biopolymer, on to polyvinyl chloride (PVC) beads. The biosorbent was characterized by FTIR spectra, porosity and surface area analyses. Equilibrium and column flow adsorption characteristics of copper(II) and nickel(II) ions on the biosorbent were studied. The effect of pH, agitation time, concentration of ...

The aim of this research was to investigate the potential of raw and iron oxide impregnated carbon nanotubes (CNTs) as adsorbents for the removal of selenium (Se) ions from wastewater. The original and modified CNTs with different loadings of Fe2O3 nanoparticles were characterized using high resolution transmission electron microscopy (HRTEM), scanning electron microscopy (SEM), X-ray diffracto...

The ability of cynodon dactylon based thermally activated carbon to remove fluoride from aqueous solution has been investigated. The batch adsorption studies were carried out at neutral pH as the functions of contact time, adsorbent dose, adsorbate concentration, temperature and effect of co-anions, which are commonly present in water. The rate of adsorption was rapid during initial 105 minutes...

Adsorption removal of Cu(II) and Cd(II) from aqueous solution using low-cost banana peels (a food waste) and bentonite clay (natural resource), was investigated. The adsorption process was studied in a batch scale at mean operation parameter which were pH, adsorbent particle size, adsorbents dosages, and initial concentrations of metal ions. All experiments were conducted at room temperature. L...

The crosslinked chitosans synthesized by the homogeneous reaction of chitosan in aqueous acetic acid solution with epichlorohydrin were used to investigate the adsorptions of three metals of Cu(II), Zn(II), and Pb(II) ions in an aqueous solution. The crosslinked chitosan characterized by 13CNMR, SEM, and elemental analysis, and the effects of pH and anion on the adsorption capacity were carried...