Pure iron has been considered as a promising candidate for biodegradable implant applications. However, a faster degradation rate of pure iron is needed to meet the clinical requirement. In this work, metal vapor vacuum arc technology was adopted to implant zinc ions into the surface of pure iron. Results showed that the implantation depth of zinc ions was about 60 nm. The degradation rate of p...

Until very recently, ion implantation has been too expensive for PV applications. However, an ion implanter has become commercially available for PV very recently, and has been used to fabricate some devices with very low saturation current-densities. We predict possible applications utilizing a combination of implantation, annealing, device, and circuit modeling. Ion energies of 30 keV and dos...

An important technique used for the suppression of surface flashover on high voltage DC ceramic insulators as well as for RF windows is that of providing some surface conduction to bleed off accumulated surface charge. We have used metal ion implantation to modify the surface of high voltage ceramic vacuum insulators to provide a uniform surface resistivity of approximately 5 x 1010 Ω/square. A...

Silicone Rubber (SR) and SR-based materials have been used as medical tissue implants in the field of plastic surgery for many years, but there are still some reports of adverse reactions to long-term implants. In our study, three types of carbon ion silicone rubber were obtained by implanting three doses of carbon ions. Then, the surface characteristics, the antibacterial adhesion properties a...

We report on the effects of low energy ion implantation on thin films of pentacene, carried out to investigate the efficacy of this process in the fabrication of organic electronic devices. Two different ions, Ne and N, have been implanted and compared, to assess the effects of different reactivity within the hydrocarbon matrix. Strong modification of the electrical conductivity, stable in time...

Plasma-based ion implantation (PBII) is usually carried out with isotropic gaseous plasmas, such as a discharge in nitrogen. More recently, it has been applied using drifting plasmas, such as those produced by cathodic arcs, in order to allow efficient implantation of metallic species. The condensable nature of a cathodic arc plasma allows for the deposition of ion-stitched thin film coatings, ...

Low hydrophilicity of graphene is one of the major obstacles for biomaterials application. To create some hydrophilic groups on graphene is addressed this issue. Herein, COOH+ ion implantation modified graphene (COOH+/graphene) and COOH functionalized graphene were designed by physical ion implantation and chemical methods, respectively. The structure and surface properties of COOH+/graphene an...

One of the key factors for successful embryo implantation is the presence of a receptive endometrium. The achievement of a receptive endometrium involves proliferation and thickening of the endometrium, synchronization of the micro architectural changes of the endometrium with the stage of embryo development and the presence of a proper cytokine environment [1]. Despite its complexity, the proc...

Endometrial thickness is defined as the minimal distance between the echogenic interfaces of myometrium and endometrium. An adequate thickness of endometrium is indispensable for embryo implantation [1-4]. The minimum endometrial thickness that may cause a successful implantation is called “threshold thickness”. The endometrium that is thinner than “threshold thickness” is called “thin endometr...