in this paper the heating process in a box annealing unit is simulated and the effect of various parameters involved in the process is examined. for this purpose, the full naiver-stokes equations along with the standard k- turbulence model are solved in the fluid region using the finite volume approach. in the solid area the conduction heat transfer equation is employed using approporate surfac...

A simple and rapid method for determination of mexiletine in pharmaceutical preparations was developed and validated using gas chromatography with flame ionization detection (GC-FID). GC separation was performed in about 5 min using a HP-5 capilary column (30 m x 0.320 mm, 0.25μm). Nitrogen was used as carrier gas at a flow-rate of 2 mL min. After injection of the sample at inlet temperature 25...

in this paper, a non-isothermal two-phase flow in the cathode gas diffusion layer (gdl) of pem fuel cell is modeled. the governing equations including energy, mass and momentum conservation equations are solved by numerical methods. also, the optimal values of the effective parameters such as the electrodes porosity, gas diffusion layer (gdl) thickness and inlet relative humidity are calculated...

Modern engines are cooled by complex air and liquid cooling systems that manage the flow of high temperature air, gases and coolants, and house critical thermal management components. Plastics, many supplied by DuPont, are playing an increasingly important role in key cooling system parts including thermostat and heater housings, outlet and inlet ports, valves, cross-overs, coolant pumps, water...

The special channels and intrinsic defects within GO laminates make it a very potential candidate for gas separation in recent years. Herein, the gas separation performance of GO membranes prepared on the surface of ceramic α-Al2O3 hollow fiber were investigated systematically. The microstructures of ceramic hollow fiber supported GO membranes were optimized by adjusting operation conditions. A...

heat recuperation is often used to improve the overall cycle efficiency of gas turbines. however, generally in small- scale gas turbines, it has a negative effect on turbine inlet temperature, pressure ratio and pressure drops, and thus decreases the overall cycle efficiency. in this paper, a thermodynamic model is performed to evaluate recovered heat as a function of heat exchanger effectivene...

Computational fluid dynamics (CFD) is potentially a valuable tool for simulating the dispersion of air contaminants in workrooms. However, CFD-estimated airflow and contaminant concentration patterns have not always shown good agreement with experimental results. Thus, understanding the factors affecting the accuracy of such simulations is critical for their successful application in occupation...

During combustion of alternative fuels in the material inlet end of cement rotary kilns, local reducing conditions may occur and cause reductive decomposition of sulfates from calcined cement raw materials. Decomposition of sulfates is problematic because it increases the gas-phase SO2 concentration, whichmay cause deposit formation in the kiln system. In this study, the release of sulfur from ...