نتایج جستجو برای: heavy oil recovery
تعداد نتایج: 454456 فیلتر نتایج به سال:
Lawrence Livermore National Laboratory (LLNL) is currently involved in a long term study using time-lapse multiple frequency electromagnetic (EM) characterization at a waterflood enhanced oil recovery (EOR) site in California operated by Chevron Heavy Oil Division in Lost Hills, California (Figure 1). The petroleum industry’s interest and the successful imaging results from this project suggest...
PURPOSE To report a case of early decomposition of retained heavy silicone oil droplets. CASE REPORT The single highly myopic eye of a 16-year-old boy with history of scleral buckling and buckle revision developed redetachment due to inferior retinal dialysis. The patient underwent pars plana vitrectomy and injection of heavy silicone oil. Early emulsification of the silicone oil was observed...
The thermal recovery method of steam flooding is one the most common development methods for heavy oil reservoirs. However, after multiple rounds injection development, composition crude and reservoir rock properties have changed greatly, which unfavorable subsequent enhanced recovery. It necessary to study distribution remaining reservoirs, clarify change characteristics components under diffe...
In oil industry, recovery of crude oil can be improved by injecting aqueous solutions containing surfactants, polymers, and mineral ions into an oil reservoir. This process is called enhanced oil recovery. Water and oil are immiscible, separated by an interface, and their motion through a capillary tube is governed by the surface tension. However, the physics can be more complex during an enhan...
به منظور شبیه سازی انتقال باکتری، رشد و متابولیتهای میکروبی تولید شده در محیط متخلخل و همچنین اثر آن در میزان ازدیاد برداشت نفت به روش میکروبی یک مدل دو بعدی، چهار فازی تهیه شده است. در فرآیند ازدیاد برداشت نفت به روش میکروبی هنگام رشد باکتری، چندین نوع متابولیت مانند الکل، سورفکتانت، گاز و پلیمر تولید می شوند، که باعث افزایش راندمان تولید نفت می شوند. مکانیسم های میکربی ازدیاد برداشت نفت در ای...
monolithic aerogels of high molecular weight polyethylene (mw= 3x106- 6x106 g/mol) have been prepared by solvent extraction with supercritical carbon dioxide from thermoreversible gels prepared in decalin. these low density and highly porous aerogels present an apparent porosity up to 90%. the aerogel morphology observed by scanning electron microscopy (sem) is characterized by spherulitic stru...
recovery factor is an important parameter in determining commercial viability of the oil reservoirs. wettability is a major factor that affects oil recovery. therefore, changing rock wettability may enhance oil recovery. in this paper, the effect of polysilicon nanoparticles on wettability change of iranian carbonate reservoir is investigated. to assess this, hydrophilic changes of carbonate ro...
in many reservoirs, after water flooding, a large volume of oil is still left behind. hot water injection is the most basic type of thermal recovery which increase recovery by improved sweep efficiency and thermal expansion of crude.in the present work, the effects of injection rate and the temperature of the injected water were surveyed by using core flooding apparatus. water flooding was perf...
The simultaneous extraction of oil and sand during the cold production of heavy oil generates high porosity channels termed “wormholes”. Wormholes grow in a 3D radial pattern within a certain layer of net pay zones, resulting in the development of a high permeability network in the reservoir, boosting oil recovery. Meanwhile, the development of wormholes causes reservoir pressure to fall below ...
نمودار تعداد نتایج جستجو در هر سال
با کلیک روی نمودار نتایج را به سال انتشار فیلتر کنید