The International Agency for Research on Cancer has classified diesel exhaust as a carcinogen based on lung cancer evidence; however, few studies have investigated the effect of engine emissions on bladder cancer. The purpose of this study was to investigate the association between occupational exposure to diesel and gasoline emissions and bladder cancer in men using data from the Canadian Nati...

An experimental investigation has been carried out for the first law analysis of a DI (direct-ignition) diesel engine running on straight soybean oil (SVO) preheated at 50, 75, 100C with different loads at varying speeds of 1750, 2000, 2250 rpm. The results show that preheated straight soybean oil may be a practical replacement of the conventional diesel fuel with a small power and efficiency d...

Experimental test are carried out on a semi-heavy duty Motorsazan MT4.244 agricultural engine at various loads in order to evaluate performance and emissions of DI diesel engine using the blends of diesel fuel with 5%, 10%,15%,20% , 30%(by volume) Castor oil and pure diesel fuel separately. The result show that maximum decreasing of PM emission is 73.2% and is observed in B15 at 50%load and the...

The study investigates the effect of aluminium oxide nanoparticles as an additive to Madhuca Indica (mahua) methyl ester blends on performance, emission analysis of a single-cylinder direct injection diesel engine operated at a constant speed at different operating conditions. The test fuels are indicated as B10A0.2, B10A0.4, B20A0.2, B20A0.4 and diesel respectively. The results indica...

The main objective of this study is to analyze the different ratio of emulsified fuels on the performance, emission and combustion characteristics of four stroke single cylinder kirloskar TV-I direct injection compression ignition engine and compared with diesel fuel under different engine loads with constant engine speed of 1500 rpm. Four kinds of test fuels were prepared namely 80% diesel, 10...

Bio-diesels and their blends are proven alternative fuels for petroleum diesel. But still the research work is going, on the bio-diesels application to make it environmental friendly. Particulate matter and oxides of nitrogen are the main pollutants in the tail pipe emissions of bio-diesel fueled engine. In this paper, mahuva methyl ester along with diethyl ether (DEE) used as fuel for the sing...

Various methods are proposed in literature for the engine faults detection, based on the combination of simulation models with measured engine data. In order to be effective, these methods must be based, in author’s opinion, on detailed, reliable and validated simulation models, able to predict the faulty engine performance, by reproducing its actual work conditions. This is particularly import...

Basic understanding of the process of coolant heat transfer inside an engine is an indispensable prerequisite to devise an infallible cooling strategy. Coolant flow and its heat transfer affect the cooling efficiency, thermal load of heated components, and thermal efficiency of a diesel engine. An efficient approach to studying cooling system for diesel engine is a 3D computational fluid dynami...

In this study, the efforts to reduce NOx and particulate matter (PM) emissions from a diesel engine using both ethanol-selective catalytic reduction (SCR) of NOx over an Ag/Al2O3 catalyst and a biodiesel-ethanol-diesel fuel blend (BE-diesel) on an engine bench test are discussed. Compared with diesel fuel, use of BE-diesel increased PM emissions by 14% due to the increase in the soluble organic...

The prevention of wax formation under high pressure on new diesel engine requires a good understanding of the behaviour of the paraffin molecules crystallization. In this work a diesel from a Petrogal refinery was investigated under pressure. In particular the melting curve was measured from atmospheric pressure to 100 MPa by an optical technique. The behaviour of the solid phase with the press...