This study evaluated heat-polymerized (HPR) and microwave-polymerized acrylic resins (MPR), after immersion in water, 1% hypochlorite and Ricinus communis solution (RC). Knoop hardness, color alteration, roughness and flexural strength tests were performed after obtaining the specimens and after time intervals of 15 (T) and 183 (T) days. Variations in data (∆) were submitted to ANOVA and Tukey ...

The purpose of this study was to evaluate the effect of addition of zinc sulfate to conventional and resinmodified glass ionomer restorative materials. The samples were prepared by addition of zinc sulfate to glass ionomer at different concentrations. The samples were tested for fluoride, zinc and aluminum release at different time intervals. The antibacterial activity of the restorative materi...

In this study, aluminum (Al) matrix reinforced with micro-particles (30 µm) and nano-particles (50 nm) boron carbide (B4C) were used to prepare Al-2.5%wt., B4C nano-composite and micro-composite, respectively, using mechanical alloying method. The mixed powders were mechanically milled at 5, 10, 15 and 20 hrs. The XRD results indicated that the crystallite sizes of both the micro-composite and ...

Overall fatigue strengths and hardness distributions of the aluminum alloy similar and dissimilar friction stir welding (FSW) joints were determined. The local fatigue strengths as well as local tensile strengths were also obtained by using small round bar specimens extracted from specific locations, such as the stir zone, heat affected zone, and base metal. It was found from the results that f...

We compared eggshell strength in a group of falcon taxa including the peregrine falcon (Falco peregrinus peregrinus), the red shaheen falcon (F. peregrinus babylonicus), the saker falcon (F. cherrug), the gyr falcon (F. rusticolus) and some interspecific and intraspecific hybrids. Our results showed that smaller falcons (<1,000 g) of the peregrine group have eggshells that are significantly sof...

PURPOSE The purpose of this study was to compare the mechanical properties of beryllium-free nickel-chromium (Ni-Cr) dental casting alloy before and after each porcelain firing cycle (once fired, twice fired, and thrice fired) and to relate these properties to the microstructural changes and changes in X-ray diffraction patterns of Ni-Cr alloy that occur after each porcelain firing cycle. MAT...

STATEMENT OF PROBLEM Flexural strength, hardness, surface roughness, discoloration, and abrasion resistance are important properties of veneering composite resins. Recently introduced veneering resins are purported to have enhanced mechanical properties due to their composition, but their long-term durability is not known. PURPOSE The purpose of this study was to test the impact of aging on 3...

in this research, mechanical alloying was used to synthesize ultrafine grained aa2024 and aa2024-b4c powders in an attrition mill under argon atmosphere up to 50 h with the rotational speed of 400 rpm. in order to determine the grain size of the matrix, x-ray diffraction test and williamson–hall method was used. after mechanical alloying, hot pressing and hot extrusion were used for densificati...

This study evaluated the influence of methacrylic acid (MA) incorporation on hardness, roughness, and flexural strength of a denture base acrylic resin. Thirty-two circular and 40 rectangular specimens were divided into four groups, according to the concentration of MA substituted into the monomer component of a heat-polymerized acrylic resin, as follows: 0% (Control), 10%, 20% and 50% (v/v). T...