This paper discusses the application of an eco-grinding system using a mixture of compressed cold air and vegetable oil. The feasibility of the system was assessed using the surface grinding of plain carbon steel 1045 with a BWA60MVA1 wheel. The investigation showed that cold air can be used to suppress surface burning under certain material removal rates and has an advantage of reduced grindin...

The following article examines the influence of glass-crystalline bond in grinding wheels with grains made from microcrystalline aluminum oxide, and specifically its effect upon the values of selected operational indicators in the process of traverse internal cylindrical grinding of surfaces made from Inconel® alloy 600. The experimental test results obtained showed that changes in the bond pha...

The effect of ultraprecision grinding on microstructural change in silicon monocrystals, such as surface roughness and dislocation structure, was investigated both experimentally and theoretically. The study found that there exists an additional concentration of oxygen and carbon in an amorphous layer for all investigated grinding regimes with their distributions dependent on the grinding varia...

Grinding is one of the most widely employed manufacturing processes when accurate finishing of workpieces is required. In order to investigate the effect of processing parameters to grinding performance, soft computing methods constitute a reliable and economical alternative to other simulation methods, such as the Finite Element Method (FEM). In this study, a comparison between classical Artif...

This paper revisited some wheel–workpiece interaction problems in surface grinding including the profile of heat flux and the variation of the wheel’s elastic modulus. A method of using an optical microscope and a CCD camera was applied to capture the depth and width of the heated zone, the details of the temperature field and the stability of the heat flux. It was found that the heat flux in u...

To study the establishment of homochirality observed in the crystal growth experiment of chiral molecules from a solution under grinding, we extend the lattice gas model of crystal growth as follows. A lattice site can be occupied by a chiral molecule in R or S form, or can be empty. Molecules form homoclusters by nearest neighbor bonds. They change their chirality if they are isolated monomers...

A suitable grinding fineness and flow-sheet could potentially reduce the mechanical entrainment of gangue minerals in the flotation process of microcrystalline graphite. In this study, the suitable grinding fineness of a commercial graphite ore was estimated by mineralogy analysis and laboratory grind-flotation tests. The target grind size of this ore should be 92% passing 74 μm based on the mi...

The model of surface grinding with a nanoparticle jet flow of MQL was established. The surface grinding thermal stress of three workpiece materials, namely, 45 Steel, 2Cr13, and nano-ZrO2 dental ceramic, were numerically simulated. Results show that dry grinding generates larger tensile stress, whereas MQL grinding generates larger compressive stress. The finished surface of workpiece produces ...

The objective of this study was to determine the effect of different sugar beet pulp (SBP) pretreatments on biogas yield from anaerobic digestion. SBP was subjected to grinding, thermal-pressure processing, enzymatic hydrolysis, or combination of these pretreatments. It was observed that grinding of SBP to 2.5-mm particles resulted in the cumulative biogas productivity of 617.2 mL/g volatile so...

This paper analyses the fracture behavior of the brazed BCBN grain by comparison with brazed PCBN grain through grinding test of Nickel-based superalloy. The self-sharpening effect is created by timing micro-fracture behavior for BCBN abrasive grains, but by macro-fracture behavior for PCBN abrasive grains. During grinding with brazed BCBN abrasive grains, the material is removed together with ...