Four principal factors contribute to grain-boundary strengthening: (a) the grain boundaries act as barriers to plastic flow; (b) the grain boundaries act as dislocation sources; (c) elastic anisotropy causes additional stresses in grain-boundary surroundings; (d) multislip is activated in the grain-boundary regions, whereas grain interiors are initially dominated by single slip, if properly ori...

Granite is a typical crystalline material, often used as a building material, but also a candidate host rock for the repository of high-level radioactive waste. The petrographic texture-including mineral constituents, grain shape, size, and distribution-controls the fracture initiation, propagation, and coalescence within granitic rocks. In this paper, experimental laboratory tests and numerica...

ITO thin ®lms (100±200 nm) are deposited on glass and plastic (PET and polycarbonate) substrates by r.f. sputtering. Process parameters such as oxygen partial pressure, r.f. power, and post deposition annealing parameters are varied to determine the dependence of the sheet resistance on process parameters. The microstructure of these thin ®lms is determined using an X-ray diffractometer (XRD) a...

How does snow’s anisotropic directional reflectance affect the mapping of snow properties from imaging spectrometer data? This sensitivity study applies two spectroscopy models to synthetic images of the spectral hemispherical–directional reflectance factor (HDRF) with prescribed snow-covered area and snow grain size. The MEMSCAG model determines both sub-pixel snow-covered area and the grain s...

,where 84, 16, 95, and 5 represent the phi values at 84, 16, 95, and 5 percentiles. Folk (1968) presented a verbal classification scale for sorting: <0.350: very well sorted; 0.35-0.500: well sorted; 0.5-0.710: moderately well sorted; 0.71-1.00: moderately sorted; 1.00-2.00: poorly sorted; 2.00-4.00: very poorly sorted; and, >4.00: extremely poorly sorted. 4. "skewness" measures the degree to w...

OBJECTIVES Air polishing with sodium bicarbonate powders with a grain size of 40 μm is recommended for patient comfort. However, the efficacy of small grain size on stain removal has not been adequately studied. This study aimed to compare the stain removal efficacy of sodium bicarbonate powders with grain sizes of 65 and 40 μm and to evaluate patient acceptance and operator opinion after using...

In this chapter, the analytical embedded atom method and calculating Gibbs free energy method are introduced briefly. Combining these methods with molecular dynamic and Monte Carlo techniques, thermodynamics of nano-silver and alloy particles have been studied systematically. For silver nanoparticles, calculations for melting temperature, molar heat of fusion, molar entropy of fusion, and tempe...

Grain-boundary relaxation in nanocrystalline Fe was studied by high-resolution transmission electron microscopy HREM , and its effect on plasticity was characterized by nanoindentation. Samples with grain size of 9.8 nm were synthesized by mechanical attrition and subsequently annealed at low temperatures 80 and 100 °C without affecting the grain size. While the hardness is not significantly af...

Abstract: Nickel was electrodeposited onto copper substrates with high {111} and {400} peak intensities. The grain size of coatings deposited onto the copper substrate with a higher {111} peak intensity was finer. Spheroidized pyramid morphology was obtained at low current densities on both copper substrates. By increasing the deposition current density, grain size of the coating was increased ...

The distribution of forest cover exerts strong controls on the spatiotemporal distribution of snow accumulation and snowmelt. The physical processes that govern these controls are poorly understood given a lack of detailed measurements of snow states. In this study, we address one of many measurement gaps by using contact spectroscopy to measure snow optical grain size at high spatial resolutio...