Biomass energy is the oldest energy source used by humans. Biomass has evolved as one of the most promising sources of fuel for the future1. This has spurred the growth of research and development efforts in both federal and private sectors. This impetus is motivated by several factors; dwindling fossil fuels and thus an increased need of energy security, environmental concerns and promotion of...

Two sets of gasification experiments were performed in an effort to understand the fate of biomass nutrients and the effects of feedstock potassium on carbon conversion during gasification. The purpose of this research was to develop a comprehensive understanding of the issues of sustainability and efficiency facing biomass gasification. The results of these studies are described in detail with...

This work reports the effect of pressure on the steam/oxygen gasification at 1000°C of the char derived from low temperature-pressure distillation of granulated scrap tyres (GST). The study was based on the analysis of gas production, carbon conversion, cold gas efficiency and the high heating value (HHV) of the product. For comparison, similar analyses were carried out for the gasification of ...

Biomass is one of the most important sources of renewable energy. One aim of Biomass gasification is to convert a solid feedstock into a valuable syngas for electricity or liquid fuel production. Actual industrial auto-thermal gasification processes achieve a production of syngas mainly polluted by products such as dust, nitrogen oxides, sulfur dioxide and tars. Tars remain, one of the main dra...

In this work, char gasification of two coals (i.e., Shenfu bituminous coal and Zunyi anthracite) and a petroleum coke under a steam and CO2 mixture (steam/CO2 partial pressures, 0.025–0.075 MPa; total pressures, 0.100 MPa) and CO2/steam chemisorption of char samples were conducted in a Thermogravimetric Analyzer (TGA). Two conventional kinetic models exhibited difficulties in exactly fitting th...

In this study, thermochemical biomass gasification was performed on a bench-scale fluidized-bed gasifier with steam and air as fluidizing and oxidizing agents. Distillers grains, a non-fermentable byproduct of ethanol production, were used as the biomass feedstock for the gasification. The goal was to investigate the effects of furnace temperature, steam to biomass ratio and equivalence ratio o...

In the entrained-flow gasifiers used in integrated gasification combined cycle (IGCC) plants, the majority of mineral matter transforms to liquid slag on the wall of the gasifier and flows out the bottom. However, a small fraction of the mineral matter is entrained (as fly ash) with the raw syngas out of the gasifier to downstream processing. This molten/sticky fly ash could cause fouling of th...

0TUse of lignocellulosic biomass as an alternative, renewable and sustainable source of energy has fulfilled part of the growing demand for energy in developed countries. Amongst various technologies applied to convert biomass wastes to biofuel and bioenergy, biomass gasification has attracted considerable attention. In this work, gasification of palm empty fruit bunch as a potential lignocellu...