Silver-impregnated membrane was facilely prepared by ex situ silver nanoparticles (NPs) blending method using polyethersulfone (PES) as the base polymer. A total of three membranes [F1(S0), F2(S0.5) and F3(S2.0)] were fabricated at different weight percentages of polymer and silver (Ag) loadings to compare their effects on membrane morphological and performance properties. All membrane types we...

Output characteristics of fuel cells are affected by a large number of parameters such as geometry, dimensions, construction materials and conditions of supplying fluids. In this paper a mathematical model followed by a two-dimensional numerical approach has been presented to study the fuel cell parametrically. Effect of oxygen concentration at gas diffusion layer entrance, temperature and ...

Chronic lower respiratory disease is highly prevalent in the United States, and there remains a need for alternatives to lung transplant for patients who progress to end-stage lung disease. Portable or implantable gas oxygenators based on microfluidic technologies can address this need, provided they operate both efficiently and biocompatibly. Incorporating biomimetic materials into such device...

■ Fully automatic operation From the world’s first commercial CO2 membrane plant for CO2 recovery in EOR applications (Scurry Area Canyon Reef Operators [SACROC] oil field) to the world’s largest CO2 membrane plant for natural gas cleanup (1.28 Bcf/d, Cakerawala Gas Field Development—Petronas Carigali Hess Operating Company), Schlumberger continues to lead the industry with state-of-the-art CYN...

Based on a multi-gas solution-diffusion problem for a dense symmetrical membrane this paper presents a transient theory of a planar, membrane-based sensor cell for measuring gas from both initial conditions: dynamic and thermodynamic equilibrium. Using this theory, the ranges for which previously developed, simpler approaches are valid will be discussed; these approaches are of vital interest f...

Acetaldehyde is a typical toxic substance of the petrochemical industry. Dissolved organic carbon (DOC) plays an important role in wastewater treatment. Therefore, molecular weight, hydrophilicity, and chemical composition DOC acetaldehyde were evaluated. First, weight (MW) distribution was investigated; results showed that mainly composed components with MW less than 1 kDa, possessed higher pr...

A full three-dimensional, single phase computational fluid dynamics model of a proton exchange membrane fuel cell (PEMFC) with both the gas distribution flow channels and the Membrane Electrode Assembly (MEA) has been developed. A single set of conservation equations which are valid for the flow channels, gas-diffusion electrodes, catalyst layers, and the membrane region are developed and numer...

Due to their non-toxic nature, biodegradability and production from renewable resources, research has shown an increasing interest in the use of biosurfactants in a wide variety of applications. This paper reviews the characterization of rhamnolipid and sophorolipid biosurfactants based on their hydrophilicity/hydrophobicity and their ability to form microemulsions with a range of oils without ...

Nanocomposite membranes composed of polymer and inorganic nanoparticles are a novel method to enhance gas separation performance. In this study, membranes were fabricated from polysulfone (PSf) containing magnesium oxide (MgO) nanoparticles and gas permeation properties of the resulting membranes were investigated. Membranes were prepared by solution blending and phase inversion methods. Morpho...

the reported work is on the preparation and characterization of polyvinyl alcohol -g- polyacrylic acid (pva-g-paa)/ polybenzimidazole sulfone (pbis) cation exchange membrane used for the electro dialysis of sodium chloride solution. the polymer syrup has been prepared using the grafting method with the help of polyvinyl alcohol and polyacrylic acid in the presence of water solvent. the polymer ...