Article history Received: 18-08-2014 Revised: 19-11-2014 Accepted: 26-01-2015 Abstract: Simulation of the interaction of a laser pulse with gas-droplet and gas-particle mixtures plays an important role in environmental and engineering applications. The injection of liquid droplets or metal particle causes optical breakdown on the individual droplet or particle and leads to a drop of the detonat...

One of the important characteristics in predicting the flow of two phases (gas and liquid) in the industrial equipment is the gas percentage in the liquid, which is called voidage. This characteristic can be measured by different methods; the optical method is one of them. In the present work, a He-Ne laser light is employed to measure the voidage. The measurement depends on the principle of la...

We are developing prototype chip-scale low-power integrated-optic gas-phase chemical sensors based on infrared Tunable Diode Laser Absorption Spectroscopy (TDLAS). TDLAS is able to sense many gas phase chemicals with high sensitivity and selectivity. Using semiconductor fabrication and assembly techniques, the low-cost integrated optic TDLAS technology will permit mass production of sensors tha...

Using interferometry, we investigate the dynamics of interaction of a relativistically intense 4-TW, 400-fs laser pulse with a He gas jet. We observe a stable plasma channel 1 mm long and less than 30 microm in diameter, with a radial gradient of electron density approximately 5 x 10(22) cm(-4) and with an on-axis electron density approximately ten times less than its maximum value of 8 x 10(19...

Laser-induced forward transfer (LIFT) is a high-resolution direct-write technique, which can print a wide range of liquid materials without a nozzle. In this process, a pulsed laser initiates the expulsion of a highvelocity micro-jet of fluid from a thin donor film. LIFT involves a novel regime for impulsively driven free-surface jetting in that viscous forces developed in the thin film become ...

Laser machining efficiency and quality are closely related to gas pressure, nozzle geometry, and standoff distance. Modeling studies of laser machining rarely incorporate gas effects in part because of the complex structure and turbulent nature of jet flow. In this paper, the interaction of a supersonic, turbulent axisymmetric jet with the workpiece is studied. Numerical simulations are carried...

Hollow silica waveguides (HSWs) are used to produce long path length, low-volume gas cells, and are demonstrated with quantum cascade laser spectroscopy. Absorption measurements are made using the intrapulse technique, which allows measurements to be made across a single laser pulse. Simultaneous laser light and gas coupling is achieved through the modification of commercially available gas fit...

The purpose of this study was to evaluate the effects of the rate of argon gas flow on joint strength in the laser-welding of cast metal plates and to measure the porosity. Two cast plates (Ti and Co-Cr alloy) of the same metal were abutted and welded together. The rates of argon gas flow were 0, 5 and 10 L/min for the Co-Cr alloy, and 5 and 10 L/min for the Ti. There was a significant differen...

In order to investigate the effect of the pressure buffer gas and frequency on the output power, a copper vapor laser with active medium length of 60 cm and bore of 16 mm has been operated and optimized using air as a buffer gas. The observed oscillatory behavior of the output power versus frequency is in good agreement with the previous reports. The measured results show the maximum output pow...