As the technology of enhanced oil recovery by gas injection has already been applied worldwide, the research of the transmit mechanism between injected-gas and oil is important to the optimization of gas injection plan. Diffusion is an important phenomenon during the process of gas injection displacement. Because of diffusion, gas molecules will penetrate into the oil phase, while the oil will ...

The application of conventional solid polymer electrolyte (SPE) to lithium-oxygen (Li-O2) batteries has suffered from a limited active reaction zone due to thick SPE and subsequent lack of O2 gas diffusion route in the positive electrode. Here we present a new design for a three-dimensional (3-D) SPE structure, incorporating a carbon nanotube (CNT) electrode, adapted for a gas-based energy stor...

This study was performed to design bilayer regioselective floating tablets of atenolol and lovastatin to give immediate release of lovastatin and sustained release of atenolol. Bilayer floating tablets comprised two layers, i.e immediate release and controlled release layers. The immediate release layer comprised sodium starch glycollate as a super disintegrant and the sustained release layer c...

Nitriding treatments of low alloyed steels can be performed only at relatively low temperatures in order to avoid a decrease of corrosion resistance due to nitride layers formation. These conditions promote the formation of the compound layer and diffusion zone, which shows high hardness and good corrosion resistance. In the present paper, the influence of the gas mixture N2-H2 in plasma nitrid...

Nickel base superalloy alloys are used in the manufacture of gas turbine engine components, which in use are exposed to high temperatures and corrosive environments. The platinum aluminide coatings described here have been developed to protect nickel base superalloy alloys from oxidation. In this study, the effect of cyclic oxidation, platinum layer thickness and aluminizing process on beha...

The phosphorus barrier layers at the doping procedure of silicon wafers were fabricated using a spin-coating method with a mixture of silica-sol and tetramethylammonium hydroxide, which can be formed at the rear surface prior to the front phosphorus spin-on-demand (SOD) diffusion and directly annealed simultaneously with the front phosphorus layer. The optimization of coating thickness was obta...

In this paper, we apply streamline-diffusion and Galerkin-least-squares finite element methods for 2D steady-state two-phase model in the cathode of polymer electrolyte fuel cell (PEFC) that contains a gas channel and a gas diffusion layer (GDL). This two-phase PEFC model is typically modeled by a modified Navier-Stokes equation for the mass and momentum, with Darcy’s drag as an additional sour...

Nowadays, micro-porous layers (MPLs) for polymer electrolyte membrane fuel cells (PEMFCs) are commonly deposited onto gas diffusion layer (GDL) substrates starting from hydrophobic carbon-based dispersions. In this work, different quantities of fluorinated ethylene propylene (FEP), a fluorinated copolymer proven to be superior to polytetrafluoroethylene (PTFE) for a proper water management, wer...

Membrane extraction has been interfaced with gas chromatography and mass spectroscopy for the analysis of volatile organics in water. The vacuum in a mass spectrometer provides fast mass transport. The time required to complete permeation in a GC interface can be fairly long, because the positive pressure of the carrier gas on the permeate side slows down the analyte permeation. The aqueous bou...