Three alternative condensing mode power and combined heat and power (CHP) waste-to-energy concepts were compared in terms of their impacts on the greenhouse gas (GHG) emissions from a heat and power generation system. The concepts included (i) grate, (ii) bubbling fluidised bed (BFB) and (iii) circulating fluidised bed (CFB) combustion of waste. The BFB and CFB take advantage of advanced combus...

This paper presents recent operating results of Coal Tech s second generation, air cooled, slagging coal combustor, and its application to power plants in the 1 to 20 MW range. This 20 MMBtu/hour combustor was installed in a new demonstration plant in Philadelphia, PA in 1995. It contains the combustion components of a 1 MWe coal fired power plant, a 17,500 lb/hour steam boiler, coal storage an...

Water-in-diesel emulsions are fuels for regular diesel engines. The advantages of an emulsion fuel are reductions in the emissions of nitrogen oxides and particulate matters, which are both health hazardous, and reduction in fuel consumption due to better burning efficiency. An important aspect is that diesel emulsions can be used without engine modifications. This review presents the influence...

The main objective of this research is to study the effects of JP-4-biodiesel-diesel fuel blends and operating parameters on the emission characteristics of a CI engine. The experimental tests were performed on a four-cylinder DI diesel engine. The Mixture-RSM method was used to develop mathematical models based on experimental data. The results showed that with the increase of the biodiesel pr...

Fuel droplets in combustors interact strongly with flames and turbulence in practical liquid-fueled combustors of terrestrial and aerial propulsion systems (Williams 1965; Sirignano 1999). Although a great deal of physical understanding has been achieved in purely gaseous combustion over the last century, not much is currently known about spray combustion at the fundamental level. In this short...

The present study is concerned with measuring and simulating soot formation and combustion in turbulent liquid fuel spray flames. Soot concentrations inside the combustor are measured by filter paper technique. The simulation is based on the solution of the fully-coupled conservation equations for turbulent flow, chemical species kinetic modeling, fuel droplet evaporation and combustion and...

This document sets forth procedures for establishing maximum emissions levels for all fossil-fuelbased thermal power plants with a capacity of 50 or more megawatts of electricity (MWe) that use coal, fuel oil, or natural gas.1 Conventional steam-producing thermal power plants generate electricity through a series of energy conversion stages: fuel is burned in boilers to convert water to high-pr...

With latest improvements in MEMS, combustion based Micro-Power generation devices are seen as alternatives for conventional batteries because of the high energy densities of Hydrogen and other hydrocarbon fuels. An important feature of micro-power system is to utilize the combustion of fuel or propellant in the micro-burner to produce the gas with high temperature and high pressure to drive tur...

Homogeneous charge compression ignition (HCCI) is an advanced combustion concept that is developed as an alternative to diesel engines with higher thermal efficiency along with ultralow NOx and PM emissions. To study the performance of this novel technique, experiments were performed in a two cylinder engine, in which one cylinder is modified to operate in HCCI mode while other cylinder operate...