Removal of heavy metals from wastewater is obligatory in order to avoid water pollution. In the present study, performance of Dowex HCR S/S cation exchange resin was evaluated for removal of nickel and zinc from aqueous solutions. Batch shaking adsorption experiments were performed in order to examine the effects of pH, dosage of resin and contact time on removal process. It was observed that m...

in this research, chitosan was used for the removal of cr (vi) ions from aqueous solution. the effect of parameters like solution ph, initial cr (vi) concentration, agitation time, amount of adsorbent and agitation speed on the adsorption process was studied. the experimental equilibrium data were analyzed by using various models such as langmuir and freundlich. freundlich isotherm model fitted...

Copper vanadate nanoparticles were synthesized by a simple coprecipitation method in an aqueous medium and the products were used as adsorbents for eliminating methylene blue (MB) from water. The structure and morphology of the produced nanoparticles were evaluated through X-Ray Diffraction (XRD) and Field Emission Scanning Electron Microscopy (FESEM) analysis. The results...

A new chelating resin was prepared by coupling Amberlite XAD-4 with alizarin red-s through an azo spacer, characterized by infra-red spectroscopy and thermal analysis and studied for Rh(III) preconcentration using inductively coupled plasma atomic emission spectroscopy (ICP-AES) for rhodium monitoring in the environment. The optimum pH for sorption of the metal ion was 6.5. The sorption capacit...

At this work, removal of Pb (II) using Lawsonia inermis (Henna) was studied. In recent years, use of low price adsorbent is taken into consideration. Adsorption experiments were performed in batch system at ambient temperature (25℃). The influence of some parameters such as time, initial metal concentration, pH and adsorbent dose were investigated. The optimum conditions was obtained at pH of 6...

In the present study, activated bleaching earth was used as clay adsorbent for an investigation of the adsorbability and adsorption kinetics of acid dyes (i.e., acid orange 51, acid blue 9, and acid orange 10) with three different molecular sizes from aqueous solution at 25 degrees C in a batch adsorber. The rate of adsorption has been investigated under the most important process parameters (i...

liquid-phases adsorption equilibrium of phenol onto two naturally available soils namely kalathur soil (kr) and adhanur soil (ar) were studied. the experimental data were analyzed using fourteen isotherm models, ranging from single-parametric model to multi-parametric models (up to 5 parameters) of the system. results show that in general the accuracy of models to fit experimental data improve...

Highly toxic nickel is released into the environment from a number of industrial processes, but current techniques for its removal are expensive and may cause secondary pollution. We developed a biosorbent of chitosan-immobilized brown algae (Laminaria japonica). The effects of different parameters on the adsorption capacity and biosorption-desorption of Ni from aqueous solution were evaluated....

Rhizomucor tauricus, an industrial fungus, was immobilized in sodium alginate and used as adsorbent for the removal of nickel from aqueous solutions. The biosorption capacity of Ni(II) was found to be 394 mg/g of immobilized biomass. It was observed that an increase in pH from 3 to 6 increased the percent adsorption, and an increase in liquid-to-solid ratio from 2 to 10 increased the metal upta...

background and purpose:the presence of dyes in wastewaters may cause serious problems for the environment because of their high toxicity to aquatic organisms and unfavorable aesthetical impact. in the present study, multi-walled carbon nanotubes (mwcnts) were used for removal of anionic dyes direct blue 106 (db106) and acid green 25 (ag25), from water samples. materials and methods:mwcnts were ...