After synthesizing Ag nanoparticles and loading onto activated carbon (from olive stone), the adsorption of methyl orange (MO) onto the prepared nanoparticles was studied. In this connection, the effect of experimental parameters such as pH range, reagent concentration, contact time, dosage amount of adsorbent and so on, on the adsorption process were studied. The experimental results were anal...

Banana pith was used as precursor material to prepare carbon with and without porogens. Characterization of the carbons showed higher BET surface area (1285 m2/g) for ZnCl2-treated carbon, comparatively. Adsorption experiments were conducted to study the removal of 2,4-dichlorophenol (DCP) from aqueous solutions using the carbons under varying experimental conditions. Decrease in pH increased t...

The potential of various chemically modified rice husk to remove Methylene Blue (MB) and Reactive Orange 16 (RO16) from aqueous solution was investigated. It was found that ethylenediamine tetraacetic acid modified rice husk (ERH) has the highest adsorption capacity for both MB and RO16. ERH was produced by treating natural rice husk (NRH) with 0.5 g of ethylenediamine tetraacetic acid (EDTA) i...

In this study, the adsorption of thallium (III) ion from aqueous solutions onto modified ZnOnanopowder as a fairly low cost adsorbent has been investigated in batch mode. It was found thatmodification of the adsorbent was essential for obtaining the significant adsorption percentage. Theadsorbent modified by sodium phosphate solution. The effect of experimental parameters such asinitial pH of s...

Adsorption of p-Nitrophenol by three different activated carbons (F100, S.E.I. and B.D.H.) was carried out at 301 K and at controlled pH conditions. Two different adsorption models (Langmuir model and Freundlich model) were studied and compared. The adsorption capacity of the carbons depends on the Point of Zero Charge (PZC) and surface area of the carbons. Adsorption of the solute at higher pH...

The surface adsorption of heavy metals in effluents with nanoparticles is today asuitable method for effluents treatment. In the present study, lignocellulose nano-fibers(LCNFs) were used as natural adsorbent for lead adsorption. The aim was to evaluate leadadsorption using adsorption isotherms, kinetics and thermodynamics. Fourier TransformInfrared Sp...

background: heavy metals have been recognized as harmful environmental pollutant known to produce highly toxic effects on different organs and systems of both humans and animals. the aim of this paper is to evaluate the adsorption potential of chitosan for the removal of pb(ii), fe(ii) and cu(ii) ions from aqueous solutions. methods: this study was conducted in laboratory scale. in this paper c...

This study was focused on nettle ash as an alternative adsorbent for the removal of nickel (II) and cadmium (II) from wastewater. Batch experiments were conducted to determine the factors affecting adsorption of nickel (II) and cadmium (II). The adsorption process is affected by various parameters such as contact time, solution pH and adsorbent dose. The optimum pH required for maximum adsorpti...

Ferula orientalis L. stalks were used as an agricultural solid biomass waste for preparation of activated carbon with zinc chloride activation using slow pyrolysis in a fixed-bed reactor. The chemical characteristics of the activated carbon obtained at 550 C were identified by elemental, fourier transform infrared spectroscopy, Brunauer–Emmett–Teller, scanning electron microscopy analyses and f...