There are many industries where austenitic stainless steel needs to be welded specially in power generation industries. Unfortunately the austenitic stainless welding has several fabrication and metallurgical drawbacks when welded by using conventional fusion welding methods, which can often leads to in-service failure. The most pronounced fabrication faults are hot cracks due to inadvertent us...

UNLABELLED Fixed orthodontic appliances make it difficult to maintain the oral hygiene, resulting in plaque accumulation. Retention of bacterial plaque, represents a risk for white spot lesions and development of periodontal disease. AIM Purpose of this study was to determine in vivo the retention of plaque on three different elastic ligatures, in comparison with stainless steel ligature, to ...

in this paper, an ultra low carbon high strength low alloy grade steel was subjected to a two-step forging processand this was followed by different post cooling methods. the highest strength was obtained at a faster coolingrate due to the highly dislocated acicular ferrite structure with the fine precipitation of microalloying carbides andcarbonitrides. at a slow cooling rate, the strength fel...

Biological systems have a remarkable capability to produce perfect fine structures such as seashells, pearls, bones, teeth and corals. These structures are composites of interacting inorganic (calcium phosphate or carbonate minerals) and organic counterparts. It is difficult to say with certainty which part has the primary role. For example, the growth of molluscan shell crystals is thought to ...

The polarisation characteristics of the electropolishing process in a magnetic field (MEP – magnetoelectropolishing), in comparison with those obtained under standard/conventional process (EP) conditions, have been obtained. The occurrence of an EP plateau has been observed in view of the optimization of MEP process. Up-to-date stainless steel surface studies always indicated some amount of fre...

The aim of this in vitro study was to investigate the frictional characteristics of two types of self-ligating brackets ('A' Company Damon SL and Adenta Time brackets) and two types of pre-adjusted edgewise brackets (TP Tip-Edge and 'A' Company Standard Twin brackets). The test brackets were glued to steel bars and aligned using a preformed jig. Five combinations of archwire size and material w...

We have developed a method for forming carbon nanotubes (CNTs) directly on the surfaces of stainless steel materials that are important industrially. Using plasma-assisted chemical vapor deposition (PCVD), CNTs are formed at comparatively low temperatures, thus avoiding excessive annealing and degradation of the stainless steel. Because the catalytic metals needed for CNT formation are containe...

BACKGROUND Failure of a sternotomy closure because of closure system fatigue is a complication that may result in dehiscence and put the individual at risk for serious complications. The purpose of this study was to assess the fatigue performance of three peristernal median sternotomy closure techniques (figure-of-eight stainless-steel wires, figure-of-eight stainless-steel cables, or Pectofix ...

the effect of chloride ions concentration on the electrochemical behavior of aisi 410 stainless steel in thesimulated concrete pore (0.1 m naoh + 0.1 m koh) solution was investigated by various electrochemicalmethods such as potentiodynamic polarization, mott–schottky analysis and electrochemical impedancespectroscopy (eis). potentiodynamic polarization curves revealed that increasing chloride ...

Pseudomonas aeruginosa readily binds to stainless steel and other abiotic surfaces, causing major problems in both the medical and food industries. In this study, we show that P. aeruginosa binds to abiotic surfaces in a concentration-dependent, saturable manner during the initial stages of biofilm formation. P. aeruginosa type IV pili mediate binding to stainless steel as a pilus-deficient str...