Aiming at demonstrating the potential of unidirectional natural fiber-reinforced thermoplastic composites in structural applications, textile flax yarn/thermoplastic polyester composites with variable fiber volume fractions have been manufactured by a filament-winding process followed by a vacuum-assisted compression molding process. The microstructure of the composites shows that the flax fibe...

Two themes form the basis of this study on fibre reinforced laminated composites: namely 'thermal residual stress' and 'transverse cracking'. Thermal residual stresses are inherent to any composite structure and are internal stress within the structure that form during manufacture. Their formation arises from the difference in coefficient of thermal expansion of the fibre and the matrix. These ...

A shear-lag model with a cohesive fibre–matrix interface has been developed for the analysis of stress transfer between the fibre and the matrix in fibre-reinforced composites in this paper. A bilinear cohesive damage evolution law is used to describe the fibre–matrix interface behaviour. The governing equations for the interfacial shear stress and the axial stress in the fibre are derived. Acc...

Fibre-reinforced composite materials are widespread in lightweight, high-performance applications. However, polymeric composites generally exhibit a brittle behaviour, which makes them susceptible to impact damage. Even low-velocity impacts can produce delaminations, cause substantial reduction of the compressive mechanical properties. Metallic layers have been embedded laminates with aim impro...

applications of thermoplastic composites have developed extensively. the thermoplastic composites in comparison with the thermoset composites have many advantages. thermoplastic composites can be melted and remolded many times. the duration of manufacturing process of these composites is short, producing very tough material, and the welding ability and multiple recyclings are their further adva...

Woven fabrics prove to be a very convenient fibre reinforcement when prepreg layers have to be draped on to double curvature moulds. The process of draping causes the angle between the warp and weft yarns to vary over the product with this double curvature. As a result, the thermomechanical properties of the fibre reinforced composite material show a corresponding distribution. These thermo-ela...

The present paper investigates the effect of adding silica nanoparticles to an anhydride-cured epoxy polymer in bulk and when used as the matrix of carbonand glass-fibre reinforced composites. The formation of ‘hybrid’ epoxy polymers, containing both silica nanoparticles and carboxyl-terminated butadiene-acrylonitrile (CTBN) rubber microparticles, is also discussed. The structure/property relat...