ÐBy incorporating the e€ects of interfacial adhesion in the mechanics of rounded contact between two bodies, a new approach is proposed for the quantitative analysis of a wide variety of contact fatigue situations involving cyclic normal, tangential or torsional loading. In this method, conditions of ``strong'' and ``weak'' adhesion are identi®ed by relating contact mechanics and fracture mecha...

This paper reviews some of the advances that have been made in stress analyses of cracked aircraft components, in the understanding of the fatigue and fatigue-crack growth process, and in the prediction of residual strength of complex aircraft structures with widespread fatigue damage. Finite-element analyses of cracked structures are now used to determine accurate stress-intensity factors for ...

The unexpected failures of structural materials in very high cycle fatigue (VHCF) regime have been a critical issue in modern engineering design. In this study, the VHCF property of a Cr-Ni-W gear steel was experimentally investigated under axial loading with the stress ratio of R = -1, and a life prediction model associated with crack initiation and growth behaviors was proposed. Results show ...

The changes in elastic lattice-strain profiles and plastic zone around the fatigue crack in a compact-tension specimen were investigated during monotonic tensile loading and unloading cycles using neutron diffraction. Spatially-resolved strain measurements were performed on a 316 LN stainless steel to determine the in-plane (parallel to the loading direction) lattice-strain profiles ahead of th...

Fatigue crack growth (FCG) research conducted in the near threshold regime has identified a room temperature creep crack growth damage mechanism for a fine grain powder metallurgy (PM) aluminum alloy (8009). At very low ∆K, an abrupt acceleration in room temperature FCG rate occurs at high stress ratio (R = Kmin/Kmax). The near threshold accelerated FCG rates are exacerbated by increased levels...

Interfacial fracture toughness and cyclic fatigue-crack growth properties of joints made from 99.5% pure alumina partially transient liquid-phase bonded using copper/niobium/copper interlayers have been investigated at both room and elevated temperatures, and assessed in terms of interfacial chemistry and microstructure. The mean interfacial fracture toughness, Gc, was found to decrease from 39...

A software tool for automated crack onset and growth simulation based on the eXtended Finite Element Method (X-FEM) is developed. This XFA tool for the first time is able to simulate arbitrary crack growth or composite delamination without remeshing. The automated tool is integrated with Abaqus/Standard and Abaqus/CAE via the customization interfaces. It seamlessly works with the Commercial, Of...

In this study, based on a regression of the crack tip displacements, the stress intensity range in fatigue is quantitatively determined for the shape memory alloy Ni2FeGa. The results are compared to the calculated stress intensity ranges with a micro-mechanical analysis accounting for the transformation-induced tractions. The effective stress intensity ranges obtained with both methods are in ...