Aluminum matrix composites reinforced with Al2O3 and SiC particles (5 Vol%) were produced using the hot powder extrusion method. Extrusion temperature and extrusion reduction in area were chosen in the range of 500 to 600°C and 90 to 95%, respectively. The physical and mechanical properties of the extruded composites such as density, tensile strength, elongation and microhardness were evaluated...

Aluminum matrix composites reinforced with Al2O3 and SiC particles (5 Vol%) were produced using the hot powder extrusion method. Extrusion temperature and extrusion reduction in area were chosen in the range of 500 to 600°C and 90 to 95%, respectively. The physical and mechanical properties of the extruded composites such as density, tensile strength, elongation and microhardness were evaluated...

Extrusion based 3D Printing (E3DP) is an Additive Manufacturing (AM) technique that extrudes thermoplastic polymer in order to build up components using a layerwise approach. Hereby, AM typically requires long production times in comparison to mass production processes such as Injection Molding. Failures during the AM process are often only noticed after build completion and frequently lead to ...

Article available on line / Article disponible en ligne à l’adresse : -------------------------------------------------------------------------------------------------------------------------------------------------------------------------http://om.ciheam.org/article.php?IDPDF=97605976 --------------------------------------------------------------------------------------------------------------...

Among all recognized severe plastic deformation techniques, a new method, called the equal channel forward extrusion process, has been experimentally studied. It has been shown that this method has similar characteristics to other severe plastic deformation methods, and the potential of this new method was examined on the mechanical properties of commercial pure aluminum. The results indicate t...

densification of biomass material that usually has a low density is proper way to increasing density,reduce transportation cost and simplify storage and distribution of these materials. pellet productionusing extrusion process is a common method for densification. the goal of this research isoptimization of specific energy consumption for extrusion process considering its effect on pelletdensit...

Cells respond to a condition of hypo-osmolality by rapid swelling followed by an adaptive response that tends to recover the normal cell volume despite the persistence of the hypo-osmotic condition. This is an active process accomplished by the extrusion of intracellular osmolytes, essentially K+, Cl-, and small organic molecules. This regulatory process operates through a chain of events that ...

The application of twin screw extrusion (TSE) as a scalable and green process for the manufacture of cocrystals was investigated. Four model cocrystal forming systems, Caffeine-Oxalic acid, Nicotinamide-trans cinnamic acid, Carbamazepine-Saccharin, and Theophylline-Citric acid, were selected for the study. The parameters of the extrusion process that influenced cocrystal formation were examined...

In this study, the effects of forming method (extrusion) and environmental factors (solution pH and temperature) on the corrosion performance of AZ91 magnesium alloys were investigated using potentiodynamic polarization, electrochemical impedance spectroscopy (EIS), scanning electron microscopy (SEM) and salt spray techniques. The polarization test results of the specimens showed that simple sh...

Semisolid powder processing (SPP) is a promising approach for near net-shape forming of features in micro/meso-scale. By combining the concept of forming in the semisolid state and conventional powder metallurgy, SPP provides a novel solution to various processing and materials engineering challenges faced in micromanufacturing. Replacing bulk materials with powdered materials adds a new dimens...