Commonly, fracture toughness tests on deeply cracked specimens are used to assess defects in large-scale components. The paper presents a method for selection of test specimen type, size and crack length order obtain estimates relevant pipes. uses available closed-form T-stress, stress intensity factor limit load solutions determine the required dimensions. reports elastic–plastic finite elemen...

Abstract-Continuing a recent investigation of interface cracks, attention is paid to the exterior crack. Two elastic solids bonded over a finite segment of their boundary and capable of transmitting shear and tensile tractions are considered. It is found that one of the edge cracks remains completely closed under shear alone, and opens gradually as the level of tension is increased. Both crack ...

The growth of slant cracks by fretting fatigue of a half plane in contact with a flat rounded pad was studied. The mode I and mode II stress intensity factors for cracks of various lengths and directions were calculated using the semi-analytical method of the distribution of dislocations, and their cumulative effect on the crack growth was investigated using the strain energy density criterion....

Shape memory alloys (SMAs) exhibit two very important properties: shape memory phenomenon and superelastic deformation due to intrinsic thermoelastic martensitic transformation. To fully exploit the potential of SMAs in developing functional structures or smart structures in mechanical and biomechanical engineering, it is important to understand and quantify the failure mechanisms of SMAs. This...

Lithium-ion batteries have become a widely-used commodity for satisfying the world’s mobile power needs. However, the mechanical degradation of lithium-ion batteries initiated by micro cracks is considered to be a bottleneck for advancing the current technology. This study utilizes a finite element method-based virtual crack closure technique to obtain particleand crack-sizedependent estimates ...

In this paper the line-spring model developed by Rice and Levy is used to obtain an approximate solution for a cylindrical shell containing a part-through surface crack. It is assumed that the shell contains a circumferential or axial semi-elliptic internal or external surface crack and is subjected to a uniform membrane loading or a uniform bending moment away from the crack region. To formula...

Carbon nanotube (CNT) is considered as a new generation of material possessing superior mechanical, thermal and electrical properties. The applications of CNT, especially in composite materials, i.e. carbon nanotube reinforced polymer have received great attention and interest in recent years. To characterize the influence of CNT on the stress intensity factor of nanocomposites, three fracture ...