A new contact bond model based on the Mohr-Coulomb failure criterion has been implemented in PFC2D to reproduce the behaviour of frictional cohesive (c, φ) geomaterials. According to this model, the bond strength can be clearly divided into two distinct micromechanical contributions: an intergranular friction angle and a cohesive bond force. A parametric analysis has been run to validate the pr...

In the Oil and Gas industry, many situations are representative of particulate flows : cutting removal in drilling operations, sand management in production, dispersed hydrates transportation in pipeline, ... Particles may be of arbitrary shape and the fluid itself may exhibit non-Newtonian properties. To enhance the comprehension of complex phenomena occurring in moderately or highly concentra...

Tribo-electrification is an important phenomenon in powder handling, as it could cause hazards and nuisance, such as dust explosion, adhesion to walls and blockage of pipelines leading to powder losses and difficulties in flow control. At present, there are only a few methods available to predict the dynamic charging of bulk powders, and they are not suitable for testing a small quantity of pow...

During agitated drying and mixing processes, particle beds are exposed to shear deformation. This leads to particle attrition, the extent of which is dependent on the prevailing stresses and strains in the bed. The distributions of shear stresses and strain rates within the bed are highly non-uniform, requiring attention to localised conditions. Therefore a narrow angular sector of the bed is d...

Fine cohesive powders are often dry granulated to improve their flowability. Roller compaction is commonly used to produce dense ribbons which are then milled. The material properties of the powder and the conditions in the roller compactor affect the strength of the ribbons, however there is no method in the literature to predict the size distribution of the product of ribbon milling. Here we ...

METHOD. K. Wada, Department of Earth and Planetary Science, University of Tokyo, 7-3-1 Hongo, Bunkyo-ku, Tokyo, 1130033, Japan ([email protected]), H. Senshu, Institute for Frontier Research on Earth Evolution, Japan Marine Science and Technology Center, 2-15, Natsushima-cho, Yokosuka, 237-0061, Japan, S. Yamamoto, T. Matsui, Graduate School of Frontier Sciences, University of Tokyo,...

this paper describes a contra-rotating propeller (crp) system to calculate the hydrodynamic characteristics and then design the optimum operational condition to be installed on two different large bulk carriers and vlcc. the method is based on boundary element method (bem) to obtain the hydrodynamic performance of any complicated configuration such as crp system, and then the optimum propeller ...

several appliances have been used for palatal expansion for treatment of posterior cross bite. the purpose of this study was to evaluate the stress induced in the apical and crestal alveolar bone and the pattern of tooth displacement following expansion via removable expansion plates or fixed-banded palatal expander using the finite element method (fem) analysis.two 3d fem models were designed ...

Boundary element method (BEM) is one of the numerical methods to solve boundary value problems of partial differential equations. The BEM is especially useful for wave scattering problems for unbounded domains since the numerical solution obtained by BEM automatically satisfies radiation condition, and also, discretisations only of the boundaries are required and those of the domain extending i...