Acacia gum (AG) was grafted with polyacrylamides different catonic ratios obtained by using amounts of acrylamide (AM) and methacrylatoethyl trimethyl ammonium chloride (DMC (cationic monomer)). The thermal properties these products were investigated differential scanning calorimetry (DSC) thermogravimetric (TGA) analyses. formation confirmed FTIR spectroscopy analysis. effects cationic polyacr...

The possibility of using water insoluble fraction from biomass pyrolysis oil as additive in synthesis of Wood-Plastic novolac has been proved by using Differential Scanning Calorimetry (DSC) and Fourier Transformed Infra Red (FT-IR) spectroscopy. Synthesis of novolac with different concentrations (10, 20 and 30 wt %) of water insoluble fraction were performed. It was found that mechanical p...

In this study, NiTi thin films were deposited on the glass and NaCl substrates by means of magnetron sputtering method. The influence of aging temperature, over the range 300-500 oC, on phase transformation and mechanical properties of the sputtered NiTi thin films were studied by differential scanning calorimetry (DSC) and nano-indentation assay, respectively. The DSC curves showed that the ag...

Thermograms obtained by differential scanning calorimetry of a range of bacteria of different heat resistances were compared. Equations were derived to calculate the rate at which the numbers of viable organisms in a calorimeter decline as the temperature is raised at a constant rate. Vegetative bacteria scanned at 10 degrees C min-1 showed multi-peaked thermograms with four major peaks (denote...

Amorphous alloys has been taken into consideration because of their unique properties and are nominated as the future engineering materials. In this research, the effect of Ni and milling time on amorphization process and thermal stability of Ti50Cu50-xNix(x=10, 15, 25 at%) alloy system were investigated. The evolution of amorphization during milling, thermal stability and subsequent heat treat...

The selected lithium germanium-phosphate glass was prepared by a conventional melt-quenching technique. XRD method employed to confirm the obtained and reveal crystalline phases during heat treatment. dilatometry (DIL), differential thermal analysis (DTA), scanning calorimetry (DSC) were used determine characteristic temperatures enthalpies of crystallization melting phase. DTA DIL obtain visco...

In this paper, the focus is on a new kind of biodegradable semi-interpenetrating polymer networks, which derived from ɛ-caprolactone, lactide, 1,4-butane diisocyanate and ethylenediamine and also its potential has been investigated in soft tissue engineering applications. The polymers were characterized by nuclear magnetic resonance (NMR) spectrometry, fourier transform infrared spectroscopy (F...

mesoporous tio2 has been prepared using a nonionic block copolymer (pluronic p-123) as structure-directing agent with sol-gel method. characterization of the product was carried out by means of x-ray diffraction (xrd), scanning electron microscopy (sem), thermogravimetry-differential scanning calorimetry (tg-dsc), nitrogen sorption isotherms, and uv-vis absorption spectroscopy. these analyses s...

Recent research has shown that estimations of the transformation temperatures of superelastic Nitinol using differential scanning calorimetry can be inaccurate, in part, due to the residual stress in the material. Superelastic Nitinol is selected as the end-cap material in a tunable cymbal transducer. The differential scanning calorimetry accuracy is initially probed by comparing transformation...

Abdominal surgeries alter the integrity of the peritoneal layer and cause imbalances among immunological, inflammatory and angiogenic mechanisms within the tissue. During laparoscopic procedures a protective function of the peritoneal layer can be disturbed by the gas used to create a pneumoperitoneum. The aim of this study was to characterize peritoneal tissue by means of differential scanning...